Journal of Dentistry
Volume 38, Issue 3 , Pages 182-190 , March 2010

Quantifying and qualifying surface changes on dental hard tissues in vitro

Received 24 September 2009 ,Revised 11 December 2009 ,Accepted 6 January 2010.

References 

  1. Barbour ME, Rees GD. The role of erosion, abrasion and attrition in tooth wear. Journal of Clinical Dentistry. 2006;17:88–93
  2. Azevedo AM, Panzeri H, Prado CJ, De-Mello JDB, Soares CJ, Fernandes-Neto AJ. Assessment in vitro of brushing on dental surface roughness alteration by laser interferometry. Brazilian Oral Research. 2008;22:11–17
  3. Gregg T, Mace S, West NX, Addy M. A study in vitro of the abrasive effect of the tongue on enamel and dentine softened by acid erosion. Caries Research. 2004;38:557–560
  4. Hove LH, Holme B, Young A, Tveit AB. The erosion-inhibiting effect of TiF4, SnF2 and NaF solutions on pellicle-covered enamel in vitro. Acta Odontologica Scandinavica. 2007;65:259–264
  5. Lippert F, Parker DM, Jandt KD. In vitro demineralization/remineralization cycles at human tooth enamel surfaces investigated by AFM and nanoindentation. Journal of Colloid and Interface Science. 2004;280:442–448
  6. Vieira A, Overweg E, Ruben JL, Huysmans MC. Toothbrush abrasion, simulated tongue friction and attrition of eroded bovine enamel in vitro. Journal of Dentistry. 2006;34:336–342
  7. Eisenburger M, Addy M, Hughes JA, Shellis RP. Effect of time on the remineralisation of enamel by synthetic saliva after citric acid erosion. Caries Research. 2001;35:211–215
  8. Hughes JA, West NX, Parker DM, van den Braak MH, Addy M. Effects of pH and concentration of citric, malic and lactic acids on enamel, in vitro. Journal of Dentistry. 2000;28:147–152
  9. Hunter ML, Patel R, Loyn T, Morgan M, Fairchild R, Rees JS. The effect of dilution on the in vitro erosive potential of a range of dilutable fruit drinks. International Journal of Paediatric Dentistry. 2008;18:251–255
  10. Pontefract H, Hughes J, Kemp K, Yates R, Newcombe RG, Addy M. The erosive effects of some mouthrinses on enamel. A study in situ. Journal of Clinical Periodontology. 2001;28:319–324
  11. West NX, Hughes JA, Addy M. Erosion of dentine and enamel in vitro by dietary acids: the effect of temperature, acid character, concentration and exposure time. Journal of Oral Rehabilitation. 2000;27:875–880
  12. Wetton S, Hughes J, Newcombe RG, Addy M. The effect of saliva derived from different individuals on the erosion of enamel and dentine. A study in vitro. Caries Research. 2007;41:423–426
  13. Wetton S, Hughes J, West N, Addy M. Exposure time of enamel and dentine to saliva for protection against erosion: a study in vitro. Caries Research. 2006;40:213–217
  14. Amaechi BT, Higham SM. In vitro remineralisation of eroded enamel lesions by saliva. Journal of Dentistry. 2001;29:371
  15. West NX, Hughes JA, Addy M. The effect of pH on the erosion of dentine and enamel by dietary acids in vitro. Journal of Oral Rehabilitation. 2001;28:860–864
  16. Eisenberger M, Addy M. Erosion and attrition of human enamel in vitro. Part II. Influence of time and loading. Journal of Dentistry. 2002;30:341–347
  17. Wiegand A, Schwerzmann M, Sener B, Carolina Magalhaes A, Roos M, Ziebolz D, et al. Impact of toothpaste slurry abrasivity and toothbrush filament stiffness on abrasion of eroded enamel – an in vitro study. Acta Odontologica Scandinavica. 2008;66:231–235
  18. Parry J, Harrington E, Rees GD, McNab R, Smith AJ. Control of brushing variables for the in vitro assessment of toothpaste abrasivity using a novel laboratory model. Journal of Dentistry. 2008;36:117–124
  19. Wiegand A, Gutsche M, Attin T. Effect of olive oil and an olive-oil-containing fluoridated mouthrinse on enamel and dentin erosion in vitro. Acta Odontologica Scandinavica. 2007;65:357–361
  20. Davis RE, Marshall TA, Qian F, Warren JJ, Wefel JS. In vitro protection against dental erosion afforded by commercially available, calcium-fortified 100 percent juices. Journal of the American Dental Association. 2007;138:1593–1598
  21. Kato MT, de Moraes Italiani F, de Araújo JJ, Garcia MD, de Carvalho Sales-Peres SH, Buzalaf MAR. Preventive effect of an iron varnish on bovine enamel erosion in vitro. Journal of Dentistry. 2009;37:233–236
  22. Ren Y-F, Zhao Q, Malmstrom H, Barnes V, Xu T. Assessing fluoride treatment and resistance of dental enamel to soft drink erosion in vitro: applications of focus variation 3D scanning microscopy and stylus profilometry. Journal of Dentistry. 2009;37:167–176
  23. Ferrazzano GF, Cantile T, Quarto M, Ingenito A, Chianese L, Addeo F. Protective effect of yogurt extract on dental enamel demineralization in vitro. Australian Dental Journal. 2008;53:314–319
  24. Poggio C, Lombardini M, Dagna A, Chiesa M, Bianchi S. Protective effect on enamel demineralization of a CPP-ACP paste: an AFM in vitro study. Journal of Dentistry. 2009;
  25. Ramalingam L, Messer LB, Reynolds EC. Adding casein phosphopeptide–amorphous calcium phosphate to sports drinks to eliminate in vitro erosion. Pediatric Dentistry. 2005;27:61–67
  26. Barbour ME, Rees JS. The laboratory assessment of enamel erosion: a review. Journal of Dentistry. 2004;32:591–602
  27. Tantbirojn D, Huang A, Ericson MD, Poolthong S. Change in surface hardness of enamel by a cola drink and a CPP-ACP paste. Journal of Dentistry. 2008;36:74–79
  28. Ablal MA, Kaur JS, Cooper L, Jarad FD, Milosevic A, Higham SM, et al. The erosive potential of some alcopops using bovine enamel: an in vitro study. Journal of Dentistry. 2009;
  29. Rees J, Loyn T, Chadwick B. Pronamel and tooth mousse: an initial assessment of erosion prevention in vitro. Journal of Dentistry. 2007;35:355–357
  30. Piekarz C, Ranjitkar S, Hunt D, McIntyre J. An in vitro assessment of the role of tooth mousse in preventing wine erosion. Australian Dental Journal. 2008;53:22–25
  31. Azzopardi A, Bartlett DW, Watson TF, Smith BG. A literature review of the techniques to measure tooth wear and erosion. European Journal of Prosthodontics and Restorative Dentistry. 2000;8:93–97
  32. Schlueter N, Ganss C, De Sanctis S, Klimek J. Evaluation of a profilometrical method for monitoring erosive tooth wear. European Journal of Oral Sciences. 2005;113:505–511
  33. Hooper SM. Development of a new toothwear index [MSc]; 1995.
  34. Grenness MJ, Tyas MJ, Osborn JE. Mapping a non-carious cervical lesion using stereoimagery and dental casts incorporating optical texture. Journal of Dentistry. 2009;37:191–197
  35. Gustafson A-G. A new method of microphotography of dental enamel in polarised light. Acta Odontologica Scandinavica. 1967;25:647–655
  36. Mor BM, Rodda JC. Histopathology of artificial carious lesions produced by lactate buffers with additives. Journal of Dental Research. 1980;59:1785
  37. Gracia L, Fowler C, Brown A, Shenton S. Enamel erosion inhibition by a new anti-erosion mouthrinse. Glasgow: British Society for Dental Research; 2009;
  38. Cehreli ZC, Lakshmipathy M, Yazici R. Effect of different splint removal techniques on the surface roughness of human enamel: a three-dimensional optical profilometry analysis. Dental Traumatology. 2008;24:177–182
  39. Smith AJ, Shaw L. Baby fruit juice and tooth erosion. British Dental Journal. 1987;167:65–67
  40. de Jong ED, Higham SM, Smith PW, van Daelen CJ, van der Veen MH. Quantified light-induced fluorescence, review of a diagnostic tool in prevention of oral disease. Journal of Applied Physics. 2009;105:
  41. Inspektor Research Systems . Quantitative light-induced fluorescence. Inspektor Research Systems; 2009;
  42. Thomas SS, Mallia RJ, Jose M, Subhash N. Investigation of in vitro dental erosion by optical techniques. Lasers in Medical Science. 2008;23:319–329
  43. Elton V, Cooper L, Higham SM, Pender N. Validation of enamel erosion in vitro. Journal of Dentistry. 2009;37:336–341
  44. Groeneveld A, Arends J. The effect of SnF2 and cetylaminohydrofluoride solutions on the acid demineralisation of enamel. Caries Research. 1974;8:275–282
  45. Ganss C, Martin H, David B, Joachim K, Nadine S. Effects of toothbrushing force on the mineral content and demineralized organic matrix of eroded dentine. European Journal of Oral Sciences. 2009;117:255–260
  46. Higham SM, Pender N, de Josselin de Jong E, Smith PW. Application of biophysical technologies in dental research. Journal of Applied Physics. 2009;105:102048
  47. West NX, Maxwell A, Hughes JA, Parker DM, Newcombe RG, Addy M. A method to measure clinical erosion: the effect of orange juice consumption on erosion of enamel. Journal of Dentistry. 1998;26:329–335
  48. Hall AF, Sadler JP, Strang R. Application of transverse microradiography for measurement of mineral loss by acid erosion. Advances in Dental Research. 1997;11:420–425
  49. Anderson P, Levinkind M, Elliot JC. Scanning microradiographic studies of rates of in vitro demineralization in human and bovine dental enamel. Archives of Oral Biology. 1998;43:649–656
  50. Klimek J, Ganss C, Jung M. Quantification of the erosive effect of dietary acids by longitudinal microradiography and profilometry. Caries Research. 1996;30:279;[abstract]
  51. Boyde A, Lester KS. Electron microscopy of resorbing surfaces of dental hard tissues. Zeitschrift fuer Zellforschung und Mikroskopische Anatomie. 1967;83:538–548
  52. Sorvari R, Peltarri A, Meurman JH. Surface ultra-structure of rat molar teeth after experimentally induced erosion and attrition. Caries Research. 1996;30:163–168
  53. Schmidlin PR, Gohrinng TN, Schug J, Lutz F. Histological, morphological, profilometric and optical changes of human tooth enamel after microabrasion. American Journal of Dentistry. 2003;16:4A–8A
  54. Faria AC, Rodrigues RC, Macedo AP, Mattos Mda G, Ribeiro RF. Accuracy of stone casts obtained by different impression materials. Brazilian Oral Research. 2008;22:293–298
  55. Warren JR, Gelikonov GV, Gelikonov VM, Feldchtein FI, Beach NM, Moores MD, et al. Imaging and characterization of dental structure using optical coherence tomography. In: Conference on lasers and electro-optics Europe – technical digest IEEE. Piscataway, NJ, United States. 1998;
  56. Fernando Arevalo J, Krivoy D, Fernandes CF. How does optical coherence tomography work? Basic principles. In:  Fernando Arevalo J editors. Retinal angiography and optical coherence tomography. New York: Springer; 2009;
  57. Wilder-Smith CH, Wilder-Smith P, Kawakami-Wong H, Voronets J, Osann K, Lussi A. Quantification of dental erosions in patients with GERD using optical coherence tomography before and after double-blind, randomized treatment with esomeprazole or placebo. American Journal of Gastroenterology. 2009;
  58. Amaechi BT, Higham SM, Podoleanu AG, Rogers JA, Jackson DA. Use of optical coherence tomography for assessment of dental caries: quantitative procedure. Journal of Oral Rehabilitation. 2001;28:1092–1093
  59. Jones RS, Darling CL, Featherstone JD, Fried D. Imaging artificial caries on the occlusal surfaces with polarization-sensitive optical coherence tomography. Caries Research. 2006;40:81–89
  60. Hannig C, Becker K, Yankeu-Ngalene VE, Attin T. Applicability of common methods for short time erosion analysis in vitro. Oral Health and Preventive Dentistry. 2008;6:239–248
  61. Wiegand A, Meier W, Sutter E, Magalhães AC, Becker K, Roos M, et al. Protective effect of different tetrafluorides on erosion of pellicle-free and pellicle-covered enamel and dentine. Caries Research. 2008;42:247–254
  62. Willershausen B, Callaway A, Azrak B, Kloss C, Schulz-Dobrick B. Prolonged in vitro exposure to white wines enhances the erosive damage on human permanent teeth compared with red wines. Nutrition Research. 2009;29:558–567
  63. Wiegand A, Magalhaes AC, Sener B, Waldheim E, Attin T. TiF(4) and NaF at pH 1.2 but not at pH 3.5 are able to reduce dentin erosion. Archives of Oral Biology. 2009;54:790–795
  64. Bhushan B, Williams VS, Shack RV. In-situ nanoindentation hardness apparatus for mechanical characterization of extremely thin films. Journal of Tribology. 1988;110:563–571
  65. Pethica JB, Hutchings R, Oliver WC. Hardness measurement at penetration depths as small as 20-nm. Philosophical Magazine A—Physics of Condensed Matter Structure Defects and Mechanical Properties. 1983;48:593–606
  66. Rios D, Honorio HM, Magalhaes AC, Buzalaf MAR, Pamla-Dibb RG, Machado MA, et al. Influence of toothbrushing on enamel softening and abrasive wear of eroded bovine enamel: an in situ study. Brazilian Oral Research. 2006;20:148–154
  67. Sales-Peres SHC, Pessan JP, Buzalaf MAR. Effect of an iron mouthrinse on enamel and dentine erosion subjected or not to abrasion: an in situ/ex vivo study. Archives of Oral Biology. 2007;52:128–132
  68. He LH, Swain MV. Contact-induced deformation of enamel. Applied Physics Letters. 2007;90:1–3
  69. Brudevold F, Tehrani A, Bakhos Y. Intraoral mineralization of abraded dental enamel. Journal of Dental Research. 1982;61:456–459
  70. Attin T. Methods for assessment of dental erosion. Monographs in Oral Science. 2006;20:152–172
  71. Duschner H, Gotz H, Walker R, Lussi A. Erosion of dental enamel visualized by confocal laser scanning microscopy. In:  Addy MEG,  Edgar WM,  Orchardson R editor. Tooth wear and sensitivity: clinical advances in restorative dentistry. 1st ed.. Informa Healthcare; 2000;
  72. Finke M, Klaus DJ, Parker DM. The early stages of native enamel dissolution studied with atomic force microscopy. Journal of Colloid and Interface Science. 2000;232:156–164
  73. Marshall GW, Marshall SJ, Balooch M, Kinney JH. Evaluating demineralisation and mechanical properties of human dentin with AFM. Methods in Molecular Biology. 2004;242:141–159
  74. Marshall GW, Chang YJ, Gansky SA, Marshall SJ. Demineralization of caries-affected transparent dentin by citric acid: an atomic force microscopy study. Dental Materials. 2001;17:45–52
  75. International Standards Organisation. Geometrical product specifications (GPS). Surface texture: profile method; measurement standards. Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards. In: standard I, ed.; 2001.
  76. Stachowiak GW, Batchelor AW, Stachowiak GB. Experimental methods in tribology. 44th ed.. Amsterdam, Oxford: Elsevier; 2004;
  77. Bhushan B. Modern tribology handbook. CRC Press; 2001;
  78. International Standards Organisation. Instruments for the measurement of surface roughness by the profile method – contact (stylus) instruments of consecutive profile transformation – contact profile meters, system M. In: standard I, ed.; 1975.
  79. Rodriguez JM, Curtis RV, Bartlett DW. Surface roughness of impression materials and dental stones scanned by non-contacting laser profilometry. Dental Materials. 2008;25:500–505
  80. McBride JW, Maul C. The 3D measurement and analysis of high precision surfaces using con-focal optical methods. IEICE Transactions on Electronics. 2004;E87:1261–1271
  81. DeLong R, Pintado MR, Ko CC, Hodges JS, Douglas WH. Factors influencing optical 3D scanning of vinyl polysiloxane impression materials. Journal of Prosthodontics. 2001;10:78–85
  82. Chun J-h , Pae A, Kim S-h. Polymerization shrinkage strain of interocclusal recording materials. Journal of Prosthetic Dentistry. 2008;102:186
  83. Attin T, Deifuss H, Hellwig E. Influence of acidified fluoride gel on abrasion resistance of eroded enamel. Caries Research. 1999;33:135–139
  84. Attin T, Knofel S, Buchalla W, Tutuncu R. In situ evaluation of different remineralization periods to decrease brushing abrasion of demineralized enamel. Caries Research. 2001;35:216–222
  85. Hemingway CA, Parker DM, Addy M, Barbour ME. Erosion of enamel by non-carbonated soft drinks with and without toothbrushing abrasion. British Dental Journal. 2006;201:447–450
  86. Hooper SM, West NX, Pickles MJ, Joiner A, Newcombe RG, Addy M. Investigation of erosion and abrasion on enamel and dentine: a model in situ using toothpastes of different abrasivity. Journal of Clinical Periodontology. 2003;30:802–808
  87. Jaeggi TLA. Toothbrush abrasion of erosively altered enamel after intraoral exposure to saliva: an in situ study. Caries Research. 1999;33:455–461
  88. Magalhaes AC, Moraes SM, Rios D, Buzalaf MAR. Effect of ion supplementation of a commercial soft drink on tooth enamel erosion. Food Additives & Contaminants: Part A: Chemistry, Analysis, Control, Exposure & Risk Assessment. 2009;26:152–156
  89. Ranjitkar S, Rodriguez JM, Kaidonis JA, Richards LC, Townsend GC, Bartlett DW. The effect of casein phosphopeptide-amorphous calcium phosphate on erosive enamel and dentine wear by toothbrush abrasion. Journal of Dentistry. 2009;37(4):250–254
  90. Giles A, Claydon NCA, Addy M, Hughes N, Sufi F, West NX. Clinical in situ study investigating abrasive effects of two commercially available toothpastes. Journal of Oral Rehabilitation. 2009;36:498–507
  91. Nasution AMT, Noerjanto B, Triwanto L. In:  Chenggen Q,  Anand A editor. Development of an inexpensive optical method for studies of dental erosion process in vitro. SPIE; 2008;p. 71551O
  92. Chadwick RG, Mitchell HL, Cameron I, Hunter B, Tulley M. Development of a novel system for assessing tooth and restoration wear. Journal of Dentistry. 1997;25:41–47
  93. International Standards Organisation. Glossary of surface roughness terms. Measurement of surface roughness parameters. In: standard I, ed.; 1984.
  94. McCabe JF, Molyvda S, Rolland SL, Rusby S, Carrick TE. Two and three body wear of dental restorative materials. International Dental Journal. 2002;5/02:406–416
  95. Abbott EJ, Firestone FA. Specifying surface quality. Mechanical Engineering. 1933;59:569–572
  96. Howell JR, Blunt CD, Hooper RM, Lee AJC, Ling RSM. In vivo surface wear mechanisms of femoral components of cemented total hip arthroplasties. The Journal of Arthroplasty. 2004;19:88
  97. Whitehead SA, Lo LY, Watts DC, Wilson NH. Changes of surface texture of enamel in vivo. Journal of Oral Rehabilitation. 1997;24:449–453
  98. Las Casas EB, Bastos FS, Godoy GCD, Buono VTL. Enamel wear and surface roughness characterization using 3D profilometry. Tribology International. 2008;41:1232–1236
  99. Bačová V, Draganovská D. Analyses of the quality of blasted surfaces. Materials Science. 2004;40:125–131
  100. Torrance AA. A simple datum for measurement of the Abbott of a profile and its first derivative. Tribology International. 1997;30:239–244
  101. Pawlus P, Grabon W. The method of truncation parameters measurement from material ratio curve. Precision Engineering. 2008;32:342–347
  102. Thomas TR. Rough surfaces. 2nd ed.. London: Imperial College Press; 1999;
  103. Kaidonis JA, Richards LC, Townsend GC, Tansley GD. Wear of human enamel: a quantitative in vitro assessment. Journal of Dental Research. 1998;77:1983–1990

PII: S0300-5712(10)00014-X

doi: 10.1016/j.jdent.2010.01.002

Journal of Dentistry
Volume 38, Issue 3 , Pages 182-190 , March 2010