Journal of Dentistry
Volume 37, Issue 11 , Pages 848-856 , November 2009

Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments

  • Bahadır Ersu

      Affiliations

    • Hacettepe University, Faculty of Dentistry, Department of Prosthodontics, Ankara, Turkey
    • ,
  • Bulem Yuzugullu

      Affiliations

    • Baskent University, Faculty of Dentistry, Department of Prosthodontics, 11. st. No: 26 06490 Bahcelievler, Ankara, Turkey
    • Corresponding Author InformationCorresponding author. Fax: +90 312 215 29 62.
    • ,
  • A. Ruya Yazici

      Affiliations

    • Hacettepe University, Faculty of Dentistry, Department of Conservative Dentistry, Ankara, Turkey
    • ,
  • Senay Canay

      Affiliations

    • Hacettepe University, Faculty of Dentistry, Department of Prosthodontics, Ankara, Turkey

Received 22 February 2009 ,Revised 22 June 2009 ,Accepted 23 June 2009.

References 

  1. Sen D, Poyrazoglu E, Tuncelli B, Göller G. Shear bond strength of resin luting cement to glass-infiltrated porous aluminum oxide cores. Journal of Prosthetic Dentistry. 2000;83:210–215
  2. Blatz MB, Sadan A, Kern M. Resin–ceramic bonding: a review of the literature. Journal of Prosthetic Dentistry. 2003;89:268–274
  3. Magne P, Belser U. Esthetic improvements and in vitro testing of In-Ceram Alumina and Spinell ceramic. International Journal of Prosthodontics. 1997;10:459–466
  4. Haselton DR, Diaz-Arnold AM, Hills SL. Clinical assessment of high-strength all-ceramic crowns. Journal of Prosthetic Dentistry. 2000;83:396–401
  5. Wood DJ, Bubb NL, Millar BJ, Dunne SM. Preliminary investigation of a novel retentive system for hydrofluoric acid etching resistant dental ceramics. Journal of Prosthetic Dentistry. 1997;78:275–280
  6. Sorenson JA, Kang SK, Torres TJ, Knode H. In-Ceram fixed partial dentures: three year clinical trial results. Journal of the California Dental Association. 1998;26:207–214
  7. Guazzato M, Albakry M, Swain MV, Ironside J. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia. International Journal of Prosthodontics. 2002;15:339–346
  8. Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. Journal of Oral Rehabilitation. 2004;31:682–688
  9. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina- and zirconia-based three-unit fixed partial dentures: a laboratory study. International Journal of Prosthodontics. 2001;4:231–238
  10. Scotti R, Catapano S, D’Elia A. A clinical evaluation of In-Ceram crowns. International Journal of Prosthodontics. 1995;8:320–323
  11. Segal BS. Retrospective assessment of 546 all-ceramic anterior and posterior crowns in a general practice. Journal of Prosthetic Dentistry. 2001;85:544–550
  12. Fradeani M, Redemagni M. An 11-year clinical evaluation of leucite-reinforced glass-ceramic crowns: a retrospective study. Quintessence International. 2002;33:503–510
  13. Toksavul S, Toman M. A short-term clinical evaluation of IPS Empress 2 crowns. International Journal of Prosthodontics. 2007;20:168–172
  14. Burke FJ, Fleming GJ, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. Journal of Adhesive Dentistry. 2002;4:7–22
  15. Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: a review of the current literature. Journal of Prosthetic Dentistry. 1998;80:280–301
  16. Ozcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dental Materials. 2003;19:725–731
  17. Ozcan M. The use of chairside silica coating for different dental applications: a clinical report. Journal of Prosthetic Dentistry. 2002;87:469–472
  18. Semmelmann JO, Kulp PR. Silane bonding porcelain teeth to acrylic. Journal of American Dental Association. 1968;76:69–73
  19. Borges GA, Sophr AM, De Goes MF, Sobrinho LC, Chan DCN. Effect of etching and airborne particle abrasion on the microstructure of different ceramics. Journal of Prosthetic Dentistry. 2003;89:479–488
  20. Ayad MF, Fahmy NZ, Rosenstiel SF. Effect of surface treatment on roughness and bond strength of a heat-pressed ceramic. Journal of Prosthetic Dentistry. 2008;99:123–130
  21. Ferrando JM, Graser GN, Tallents RH, Jarvis RH. Tensile strength and microleakage of porcelain repair materials. Journal of Prosthetic Dentistry. 1983;50:44–50
  22. Lacy AM, LaLuz J, Watanabe LG, Dellinges M. Effect of porcelain surface treatment on the bond to composite. Journal of Prosthetic Dentistry. 1988;60:288–291
  23. Calamia JR. Etched porcelain veneers: the current state of art. Quintessence International. 1985;16:5–12
  24. Bailey LF, Bennet RJ. Dicor surface treatments for enhanced bonding. Journal of Dental Research. 1988;67:925–931
  25. Della Bona A, Borba M, Benetti P, Cecchetti D. Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin. Brazilian Oral Research. 2007;21:10–15
  26. Nagayassu MP, Shintome LK, Uemura ES, Araujo JEJ. Effect of surface treatment on the shear bond strength of a resin-based cement to porcelain. Brazilian Dental Journal. 2006;17:290–295
  27. Awliya W, Oden A, Yaman P, Dennison JB, Razoog ME. Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontologica Scandinavica. 1998;56:9–13
  28. Della Bona A, Donassollo TA, Demarco FF, Barrett AA, Mecholsky JJ. Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic. Dental Materials. 2007;23:769–775
  29. Maiman TH. Stimulated optical radiation in ruby. Nature. 1960;187:493
  30. Convissar RA, Goldstein EE. A combined carbon dioxide/erbium laser for soft and hard tissue procedures. Dentistry Today. 2001;20:66–71
  31. Beyer E, Behter K, Petschke U. Schweissen mit CO2-Lasern. Laser u. Optoelektronik. 1986;18:35–46In:  Misrendino LJ,  Pick RM editor. Lasers in dentistry. Chicago: Quintessence; 1989;p. 231–245
  32. Akova T, Yoldas O, Toroglu MS, Uysal H. Porcelain surface treatment by laser for bracket-porcelain bonding. American Journal of Orthodontics and Dentofacial Orthopedics. 2005;128:630–637
  33. Dobberstein H, Dobberstein H, Schwarz A, Zuhrt R, Tani Y. Laser processing of dental materials. Lasers in dentistry. Elsevier Science; 1989;p. 231–45
  34. Rueggeberg FA, Lockwood P. Thermal debracketing of orthodontic resins. American Journal of Orthodontics and Dentofacial Orthopedics. 1990;98:56–65
  35. Serebro L, Segal T, Nordenberg D, Gorfil C, Bar-Lev M. Examination of tooth pulp following laser beam irradiation. Lasers in Surgery and Medicine. 1987;7:236–239
  36. Steward GP, Jain P, Hodges J. Shear bond strength of resin cements to both ceramic and dentin. Journal of Prosthetic Dentistry. 2002;88:277–284
  37. Ariyaratnam MT, Wilson MA, Mackie IC, Blinkhorn AS. A comparison of surface roughness and composite/enamel bond strength of human enamel following the application of the Nd:YAG laser and etching with phosphoric acid. Dental Materials. 1997;13:51–55
  38. Walsh LJ, Abood D, Brockhurst PJ. Bonding of resin composite to carbon dioxide laser-modified human enamel. Dental Materials. 1994;10:162–166
  39. Advanced technical ceramics. Monolithic ceramics. General and texture properties. Part 4. Determination of surface roughness. The European Standard EN 623-4: 2004.
  40. Thompson JY, Rapp MM, Parker AJ. Microscopic and energy dispersive X-ray analysis of surface adaptation of dental cements to dental ceramic surfaces. Journal of Prosthetic Dentistry. 1998;79:378–383
  41. Söderholm K-JM. Correlation of in vivo and in vitro performance of adhesive materials: a report of the ASC MD 156 task group on test methods for adhesion of restorative materials. Dental Materials. 1991;7:74–83
  42. Swift EJ, Perdigao J, Heymann HO. Bonding to enamel and dentine: a brief history and state of art. Quintessence International. 1995;26:95–110
  43. Dérand P, Dérand T. Bond strength of luting cements to zirconium oxide ceramics. International Journal of Prosthodontics. 2000;13:131–135
  44. DeHoff PH, Annusavice KJ, Wang Z. Three-dimensional finite element analysis of the shear bond test. Dental Materials. 1995;11:126–131
  45. Großmann J, Emmel A, Schubert E, Bergmann HW. Generation of new surface conditions on SiC materials by excimer laser irradiation: mechanisms–properties–applications. Laser und Optoelektronik. 1994;26:34–39
  46. Krasnikov AS, Sokolova TN, Mirkin LI, Krasnikova MD, Ermakov NI. Structure, phase composition and properties of aluminum-oxide ceramic in the laser action zone. Neorganicheskie Materialy. 1987;23:2069–2073
  47. Romanov BP, Smirnov SV. Fracture of brittle materials by continuous laser radiation. Neorganicheskie Materialy. 1989;25:350–351
  48. Ozcan M, Alkumru HA, Gemalmaz D. The effect of surface treatment on the shear bond strength of luting cement to glass-infiltrated alumina ceramic. International Journal of Prosthodontics. 2001;14:335–339
  49. Kern M, Wegner S. Bonding to zirconia ceramic: adhesion methods and their durability. Dental Materials. 1998;14:64–71
  50. Hummel M, Kern M. Durability of the resin bond strength to the alumina ceramic Procera. Dental Materials. 2004;20:498–508
  51. Won-suck O, Shen C. Effect of surface topography on the bond strength of a composite to three different types of ceramic. Journal of Prosthetic Dentistry. 2003;90:241–246

PII: S0300-5712(09)00163-8

doi: 10.1016/j.jdent.2009.06.017

Journal of Dentistry
Volume 37, Issue 11 , Pages 848-856 , November 2009

Article Tools

* Image Usage & Resolution