Journal of Dentistry
Volume 37, Issue 4 , Pages 255-263 , April 2009

Effect acidic and alkaline/heat treatments on the bond strength of different luting cements to commercially pure titanium

  • Amr S. Fawzy

      Affiliations

    • Department of Biomaterials, Faculty of Dentistry, Ain Shams University, Cairo, Egypt
    • Corresponding Author InformationCorresponding author. Tel.: +20 2 26359765; fax: +20 2 26382906.
    • ,
  • Farid S. El-Askary

      Affiliations

    • Operative Dentistry, Conservative Dentistry Department, Faculty of Dentistry, Ain Shams University, Cairo, Egypt

Received 4 September 2008 ,Revised 27 November 2008 ,Accepted 28 November 2008.

References 

  1. Wang RR, Fenton A. Titanium for prosthodontic applications: a review of the literature. Quintessence International. 1996;27:401–408
  2. McCracken M. Dental implant materials: commercially pure titanium and titanium alloys. Journal of Prosthetic Dentistry. 1999;18:40–43
  3. Watanabe F, Powers JM, Lorey RF. In vitro bonding of prosthodontic adhesive to dental alloys. Journal of Dental Research. 1988;67:479–483
  4. Blackman R, Barghi N, Tran C. Dimensional changes in casting titanium removable partial denture frameworks. Journal of Prosthetic Dentistry. 1991;65:309–315
  5. Anderson M, Bergman B, Bessing C, Ericson G, Lundquist P, Nilson H. Clinical results with titanium crowns fabricated with machine duplication and spark erosion. Acta Odontologica Scandinavica. 1989;47:279–286
  6. Kononen M, Rintanen J, Waltimo A, Kempainen P. Titanium framework removable partial dentures used for patient allergic to other metals: a clinical report and literature review. Journal of Prosthetic Dentistry. 1995;73:4–7
  7. Breeding LC, Dixon DL, Bogacki MT, Tiege JD. Use of luting agents in implant system. Part I. Journal of Prosthetic Dentistry. 1992;68:737–741
  8. Hebel KS, Gajjar RC. Cement-retained versus screw retained implant restorations: achieving optimal occlusion and esthetics in implant dentistry. Journal of Prosthetic Dentistry. 1997;77:28–35
  9. Ban S. Effect of alkaline treatment of pure titanium and its alloys on the bonding strength of dental veneering resins. Journal of Biomedical Materials Research. 2003;66A:138–145
  10. Schneider R, Goes M, Henriques G, Chan D. Tensile bond strength of dual curing resin-based cements to commercially pure titanium. Dental Materials. 2007;23:81–87
  11. Yoshida T, Terashima N, Niiro T, Nagasawa S, Ito M, Yagasaki H, et al. Bond strength of resin cements to H2O2-treated titanium plates. Dental Materials. 2005;21:1087–1097
  12. Tsuchimoto Y, Yoshida Y, Takeuchi M, Mine A, Yatani H, Tagawa Y, et al. Effect of surface pre-treatment on durability of resin-based cements bonded to titanium. Dental Materials. 2006;22:545–552
  13. Powers J, Sakaguchi R. Craig’s restorative dental materials. 12th ed.. Mosby, Elsevier; 2006;p. 479–511
  14. Layton GH, Driscoll C, Hondrum SO. The effect of luting agents on the retention and marginal adaptation of the CeraOne implant system. International Journal of Oral & Maxillofacial Implants. 1997;12:660–665
  15. Covey DA, Kent DK, St Germain HA, Koka S. Effects of abutments size and luting cement type on the uniaxial retention force of implant-supported crowns. Journal of Prosthetic Dentistry. 2000;83:344–348
  16. Koka S, Ewoldsen NO, Dana CL, Beatty MW. The effect of cementing agent and technique on the retention of a CeraOne gold cylinder: a pilot study. Implant Dentistry. 1995;4:32–35
  17. Vanzillotta P, Sader M, Bastos I, Soares G. Improvement of in vitro titanium bioactivity by three different surface treatments. Dental Materials. 2006;22:275–282
  18. Forsten L. Short- and long-term fluoride release from glass ionomer and other fluoride-containing filling materials in vitro. Scandinavian Journal of Dental Research. 1990;98:179–185
  19. Forsten L. Fluoride release of glass ionomers. In:  Hunt P editors. Proceedings of the 2nd symposium on glass ionomer cements. Philadelphia. 1994;p. 241–246
  20. Van Noort R. In: Introduction to dental materials. 2nd ed.. Mosby; 2002;p. 68–140
  21. Gladys S, van Meerbeek B, Braem M, Lambrechts P, Vanherle G. Comparative physico-mechanical characterization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials. Journal of Dental Research. 1997;76:883–894
  22. Burgess J, Norling B, Summitt J. Resin ionomer restorative materials: the new generation. Journal of Esthetic Dentistry. 1994;6:207–215
  23. DeGee AJ, van Duinen RNB, Werner A, Davidson CL. Early and long-term wear of conventional and resin-modified glass ionomers. Journal of Dental Research. 1996;75:1613–1619
  24. Wolfart M, Wolfart S, Kern M. Retention forces and seating discrepancies of implant-retained castings after cementation. International Journal of Oral and Maxillofacial Implants. 2006;21:519–525
  25. Taira Y, Yanagida H, Matsumura H, Yoshida K, Atsuta M, Suzuki S. Adhesive bonding of titanium with a thione-phosphate dual functional primer and self-curing luting agents. European Journal of Oral Sciences. 2000;108:456–460
  26. Ikemura K, Kouro Y, Endo T. Effect of 4-acryloxyethyltrimellitic acid in a self-etching primer on bonding to ground dentin. Dental Materials Journal. 1996;15:132–143
  27. Matsumura H, Yoshida K, Tanaka T, Atsuta M. Adhesive bonding of titanium with a titanate coupler and 4-META/MMA-TBB opaque resin. Journal of Dental Research. 1990;69:1614–1616
  28. Ohno H, Yamane Y, Endo K, Araki Y, Iizuka R. Adhesion of adhesive resin to dental precious metal alloys. Part I. New precious metal alloys with base metals for resin bonding. Dental Materials Journal. 1998;17:285–293
  29. Kim HM, Miyaji F, Kokubo T, Nakamura T. Preparation of bioactive Ti and its alloys via simple chemical surface treatment. Journal of Biomedical Materials Research. 1996;32:409–417
  30. Beech DR. Improvement in the adhesion of polyacrylate cements to human dentin. British Dental Journal. 1973;135:442–445
  31. Wilson AD, Prosser HJ, Powis DR. Mechanism of adhesion of polyelectrolyte cements to hydroxyapatite. Journal of Dental Research. 1983;62:590–592
  32. Tanaka T, Fujiyama E, Shimazu H, Takaki A, Atsuta M. Surface treatment of nonprecious alloys for adhesion-fixed partial dentures. Journal of Prosthetic Dentistry. 1986;55:456–462
  33. Goharian R, Maleknejad F, Salari T, Ghavamnasiri M, Derhami M. Effect of adhesives on bond strength of porcelain veneer to base metal alloy. Quintessence International. 2002;33:595–599
  34. Sahmali S, Demirel F, Saygili G. Comparison of in vitro tensile bond strengths of luting cements to metallic and tooth-colored posts. International Journal of Periodontics & Restorative Dentistry. 2004;24:256–263

PII: S0300-5712(08)00316-3

doi: 10.1016/j.jdent.2008.11.021

Journal of Dentistry
Volume 37, Issue 4 , Pages 255-263 , April 2009

Article Tools

* Image Usage & Resolution