Journal of Dentistry
Volume 37, Issue 1 , Pages 52-58 , January 2009

In vitro vertical misfit evaluation of cast frameworks for cement-retained implant-supported partial prostheses

  • Raquel Castillo Oyagüe

      Affiliations

    • Department of Prosthodontics, Faculty of Dentistry, University Complutense of Madrid, UCM, Avda. Complutense s/n, 28040 Madrid, Spain
    • Corresponding Author InformationCorresponding author. Tel.: +34 607367903; fax: +34 947506610.
    • ,
  • Andrés Sánchez Turrión

      Affiliations

    • Department of Prosthodontics, Faculty of Dentistry, University Complutense of Madrid, UCM, 28040 Madrid, Spain
    • ,
  • Manuel Toledano

      Affiliations

    • Department of Dental Materials, School of Dentistry, University of Granada, 18071 Granada, Spain
    • ,
  • Francesca Monticelli

      Affiliations

    • Department of Surgery, Faculty of Sport and Health Sciences, University of Zaragoza, 22006 Huesca, Spain
    • ,
  • Raquel Osorio

      Affiliations

    • Department of Dental Materials, School of Dentistry, University of Granada, 18071 Granada, Spain

Received 7 July 2008 ,Revised 5 September 2008 ,Accepted 8 September 2008.

References 

  1. Misch CE. Dental implant prosthetics. St. Louis: Elsevier/Mosby; 2005;p. 414
  2. Singer A, Sefarty V. Cement retained implant-supported fixed partial dentures: a 6 month to 3-year follow-up. International Journal of Oral and Maxillofacial Implants. 1996;11:645–649
  3. Guichet DL, Caputto A, Choi H, Sorensen JA. Passivity of fit and marginal opening in screw or cement-retained implant fixed partial denture designs. International Journal of Oral and Maxillofacial Implants. 2000;15:239–246
  4. Taylor TD, Agar JR, Vogiatzi T. Implant prosthodontics: current perspective and future directions. International Journal of Oral and Maxillofacial Implants. 2000;15:66–75
  5. Karl M, Taylor TD, Wichmann MG, Heckmann SM. In vivo stress behaviour in cemented and screw-retained five-unit implant FPDs. Journal of Prosthodontics. 2006;15:20–24
  6. The Academy of Prosthodontics. The glossary of prosthodontics terms. Journal of Prosthetic Dentistry 2005; 94: 10–92.
  7. Weinberg L. The biomechanics of force distribution in implant-supported prostheses. International Journal of Oral and Maxillofacial Implants. 1993;8:19–31
  8. Sones AD. Complications with osseointegrated implants. Journal of Prosthetic Dentistry. 1989;62:581–585
  9. Abt E. Growing body of evidence on survival rates of implant-supported fixed prostheses. Evidenced Based Dentistry. 2008;9:51–52
  10. Tan KB, Rubenstein JE, Nicholls JI, Ruodelis RA. Three-dimensional analysis of the casting accuracy of one piece, osseointegrated implant retained prostheses. International Journal of Prosthodontics. 1993;6:346–363
  11. Goll GE. Production of accurately fitting full-arch implant frameworks. Part I. Clinical procedures. Journal of Prosthetic Dentistry. 1991;66:377–384
  12. Carr AB, Brunski JB. Preload and load sharing of strain gauged CP-Ti implant components. Journal of Dental Research. 1992;71:528;[Abstract No 106]
  13. Piemjai M. Effect of seating force, margin design, and cement on marginal seal and retention of complete metal crowns. International Journal of Prosthodontics. 2001;14:412–416
  14. Cook WD. Rheological studies of the setting of water-based cements. Australian Dental Journal. 1984;29:44–49
  15. Ishikiriami A, Oliviera JF, Vieira DF, Mondelli J. Influence of some factors on the fit of cemented crowns. Journal of Prosthetic Dentistry. 1981;45:400–404
  16. Assif D, Rimer Y, Aviv I. The flow of zinc phosphate cement under a full-coverage restoration and its effect on marginal adaptation according to the location of cement application. Quintessence International. 1987;18:765–774
  17. White SN, Yu Z, Tom J, Sangsurasak S. In vitro marginal adaptation of cast crowns luted with different cements. Journal of Prosthetic Dentistry. 1995;74:25–32
  18. Cherkasski B, Wilson PR. The effect of oscillation, low seating force and dentine surface treatment on pulpward pressure transmission during crown cementation: a laboratory study. Journal of Oral Rehabilitation. 2003;30:957–963
  19. Oruç S, Tulunoglu Ý. Fit of titanium and a base metal alloy metal–ceramic crown. Journal of Prosthetic Dentistry. 2000;83:314–318
  20. Jemt T, Linden B. Fixed implant-supported prostheses with laser welded titanium frameworks. International Journal of Periodontics and Restorative Dentistry. 1992;12:177–184
  21. Jemt T, Bergendal B, Arvidson K, Bergendal T, Karlsson U, Linden B, et al. Implant-supported welded titanium frameworks in the edentulous maxilla: a 5-year prospective multicenter study. International Journal of Prosthodontics. 2002;15:544–548
  22. Bergman B, Bessing C, Ericson G, Lundquist P, Nilson H, Andersson M. A 2-year follow-up study of titanium crowns. Acta Odontologica Scandinavica. 1990;48:113–117
  23. Ruiz Contreras EF, Pessanha Henriques GE, Ruiz Giolo S, Arruda Nobilo MA. Fit of cast commercially pure titanium and Ti–6Al–4V alloy crowns before and after marginal refinement by electrical discharge machining. Journal of Prosthetic Dentistry. 2002;88:467–472
  24. Calesini G, Bruschi GB, Scipioni A, Micarelli C, Di Felice A. One-piece castings in fixed prosthodontics: a study of marginal adaptation using computerized SEM images. International Journal of Prosthodontics. 2000;13:275–281
  25. Sahin S, Cehreli MC. The significance of passive framework fit in implant prosthodontics: current status. Implant Dentistry. 2001;10:85–92
  26. Bedi A, Michalakis KX, Hirayama H, Stark PC. The effect of different investment techniques on the surface roughness and irregularities of gold palladium alloy castings. The Journal of Prosthetic Dentistry. 2008;99:282–286
  27. Kan JYK, Rungcharassaeng K, Bohsali K, Goodacre CJ, Lang BR. Clinical methods for evaluating implant framework fit. The Journal of Prosthetic Dentistry. 1999;81:7–13
  28. Keith SE, Miller BH, Woody RD, Higginbottom FL. Marginal discrepancy of screw-retained and cemented metal–ceramic crowns on implant abutments. International Journal of Oral and Maxillofacial Implants. 1999;14:369–378
  29. Riedy SJ, Lang BR, Lang BE. Fit of implant frameworks fabricated by different techniques. The Journal of Prosthetic Dentistry. 1997;78:596–604
  30. Schiffliger B, Ziebert G, Dhuru V, Brantley W, Sigaroudi K. Comparison of accuracy of multiunit one-piece castings. Journal of Prosthetic Dentistry. 1985;54:770–776
  31. Ziebert G, Hurtado M, Glapa C, Schiffliger B. Accuracy of one-piece castings, preceramic and postceramic soldering. Journal of Prosthetic Dentistry. 1986;55:312–317
  32. McLean JW. The science and art of dental ceramics. vol. 2. Chicago: Quintessence; 1980;pp. 200–260
  33. Yanase RT, Binon PP, Jemt T, Gulbransen HJ, Parel S. Current issue form. How do you test a cast framework for full arch fixed implant supported prosthesis?. International Journal of Oral and Maxillofacial Implants. 1994;9:471–474
  34. Karl M, Winter W, Taylor TD, Heckmann SM. In vitro study on passive fit in implant-supported 5-unit fixed partial dentures. International Journal of Oral and Maxillofacial Implants. 2004;19:30–37
  35. Karl M, Winter W, Taylor TD, Heckmann SM. Fixation of 5-unit implant-supported fixed partial dentures and resulting bone loading: a finite element assessment based on in vivo strain measurements. International Journal of Oral and Maxillofacial Implants. 2006;21:756–762

PII: S0300-5712(08)00259-5

doi: 10.1016/j.jdent.2008.09.007

Journal of Dentistry
Volume 37, Issue 1 , Pages 52-58 , January 2009

Article Tools

* Image Usage & Resolution