Journal of Dentistry
Volume 36, Issue 11 , Pages 861-872 , November 2008

Effect of surface condition and storage time on the repairability of temporary crown and fixed partial denture materials

  • Markus Balkenhol

      Affiliations

    • Department of Prosthetic Dentistry, Justus Liebig University, Schlangenzahl 14, D-35392 Giessen, Germany
    • Corresponding Author InformationCorresponding author. Tel.: +49 641 9946144; fax: +49 641 9946139.
    • ,
  • Manuela Meyer

      Affiliations

    • Private Practice, Prümer Str. 6, D-54589 Stadtkyll, Germany
    • ,
  • Karin Michel

      Affiliations

    • Department of Prosthetic Dentistry, Justus Liebig University, Schlangenzahl 14, D-35392 Giessen, Germany
    • ,
  • Paul Ferger

      Affiliations

    • Department of Prosthetic Dentistry, Justus Liebig University, Schlangenzahl 14, D-35392 Giessen, Germany
    • ,
  • Bernd Wöstmann

      Affiliations

    • Department of Prosthetic Dentistry, Justus Liebig University, Schlangenzahl 14, D-35392 Giessen, Germany

Received 21 March 2008 ,Revised 21 June 2008 ,Accepted 27 June 2008.

References 

  1. Behrend DA. Temporary protective restorations in crown and bridge work. Australian Dental Journal. 1967;12:411–416
  2. Trushkowsky RD. Fabrication of a fixed provisional restoration utilizing a light-curing acrylic resin. Quintessence International. 1992;23:415–419
  3. Ferencz JL. Maintaining and enhancing gingival architecture in fixed prosthodontics. Journal of Prosthetic Dentistry. 1991;65:650–657
  4. In:  Körber K-H editors. Zahnärztliche Prothetik. 3rd ed.. Stuttgart: Thieme; 1985;
  5. In:  Ludwig P,  Niedermeyer W editor. Checklisten der Zahnmedizin. Prothetik. 1st ed.. Stuttgart: Thieme; 2002;
  6. In:  Koeck B editors. Praxis der Zahnheilkunde. 4th ed.. München: Urban & Fischer; 1999;
  7. In:  Lehmann KM,  Hellwig E editor. Zahnärztliche Propädeutik. 9th ed.. München: Urban & Fischer; 2002;
  8. Burke FJ, Murray MC, Shortall AC. Trends in indirect dentistry: 6. Provisional restorations, more than just a temporary. Dental Update. 2005;32:443–444447–8, 450–2
  9. Academy of Prosthodontics . The glossary of prosthodontic terms. Journal of Prosthetic Dentistry. 2005;94:10–92
  10. Balkenhol M, Ferger P, Mautner MC, Wöstmann B. Provisional crown and fixed partial denture materials: mechanical properties and degree of conversion. Dental Materials. 2007;23:1574–1583
  11. Balkenhol M, Mautner MC, Ferger P, Wöstmann B. Mechanical properties of provisional crown and bridge materials: chemical-curing versus dual-curing systems. Journal of Dentistry. 2008;36:15–20
  12. Burns DR, Beck DA, Nelson SK. A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics. Journal of Prosthetic Dentistry. 2003;90:474–497
  13. Foussekis K, Kern M, Ludwig K. Vergleichende Untersuchung zur Bruchfestigkeit und Reparaturfähigkeit von direkten Brückenprovisorien. Deutsche Zahnärztliche Zeitschrift. 2001;56:612–615
  14. Gough M. A review of temporary crowns and bridges. Dental Update. 1994;21:203–207
  15. Bohnenkamp DM, Garcia LT. Repair of bis-acryl provisional restorations using flowable composite resin. Journal of Prosthetic Dentistry. 2004;92:500–502
  16. Hagge MS, Lindemuth JS, Jones AG. Shear bond strength of bis-acryl composite provisional material repaired with flowable composite. Journal of Esthetic and Restorative Dentistry. 2002;14:47–52
  17. Rosentritt M, Behr M, Lang R, Handel G. Flexural properties of prosthetic provisional polymers. European Journal of Prosthodontics and Restorative Dentistry. 2004;12:75–79
  18. Solow RA. Composite veneered acrylic resin provisional restorations for complete veneer crowns. Journal of Prosthetic Dentistry. 1999;82:515–517
  19. In:  Dietrich H,  Dietrich J editor. Die provisorische Versorgung. 2nd ed.. Fuchstal: Teamwork Media; 2002;
  20. Vahidi F. The provisional restoration. Dental Clinics of North America. 1987;31:363–381
  21. Gegauff AG, Holloway JA. Interim fixed restorations. In:  Rosenstiel SF,  Land MF,  Fujimoto J editor. Contemporary fixed prosthodontics. 4th ed.. St. Louis: Mosby Elsevier; 2006;p. 466–504
  22. Fehling AW, Neitzke C. A direct provisional restoration for decreased occlusal wear and improved marginal integrity: a hybrid technique. Journal of Prosthodontics. 1994;3:256–260
  23. Dumbrigue HB. Composite indirect–direct method for fabricating multiple-unit provisional restorations. Journal of Prosthetic Dentistry. 2003;89:86–88
  24. Mayer T. Mikrostruktur und Materialeigenschaften verschiedener provisorischer Kronen- und Bruckenmaterialien. Schweizer Monatsschrift für Zahnmedizin. 1995;105:1134–1141
  25. Lowe RA. The art and science of provisionalization. International Journal of Periodontics and Restorative Dentistry. 1987;7:64–73
  26. Koumjian JH, Nimmo A. Evaluation of fracture resistance of resins used for provisional restorations. Journal of Prosthetic Dentistry. 1990;64:654–657
  27. Rosentritt M, Behr M, Kolbeck C, Handel G. In vitro repair of three-unit fiber-reinforced composite FPDs. International Journal of Prosthodontics. 2001;14:344–349
  28. Wang RL, Moore BK, Goodacre CJ, Swartz ML, Andres CJ. A comparison of resins for fabricating provisional fixed restorations. International Journal of Prosthodontics. 1989;2:173–184
  29. In:  Bühl A,  Zöfel P editor. SPSS 12. Einführung in die moderne Datenanalyse unter Windows. 9th ed.. München: Pearson Education; 2004;
  30. In:  Sachs L editors. Angewandte Statistik: Anwendung statistischer Methoden. 7th ed.. Berlin: Springer; 1992;
  31. In:  Salkind NJ editors. Statistics for people who (think they) hate statistics. 2nd ed.. Thousand Oaks: Sage Publications; 2004;
  32. 3M-ESPE. Protemp 3 Garant - technisches Produktprofil. Nr 702 009 482 74/01; 01.2002.
  33. Ahlers MO, Platzer U. Scherfestigkeiten bei repariertem Kompositkunststoff unter verschiedenen Versuchsbedingungen. Deutsche Zahnärztliche Zeitschrift. 1995;50:821–823
  34. Azarbal P, Boyer DB, Chan KC. The effect of bonding agents on the interfacial bond strength of repaired composites. Dental Materials. 1986;2:153–155
  35. Bonstein T, Garlapo D, Donarummo J, Bush PJ. Evaluation of varied repair protocols applied to aged composite resin. Journal of Adhesive Dentistry. 2005;7:41–49
  36. Bouschlicher MR, Reinhardt JW, Vargas MA. Surface treatment techniques for resin composite repair. American Journal of Dentistry. 1997;10:279–283
  37. Boyer DB, Chan KC, Reinhardt JW. Build-up and repair of light-cured composites: bond strength. Journal of Dental Research. 1984;63:1241–1244
  38. Boyer DB, Chan KC, Torney DL. The strength of multilayer and repaired composite resin. Journal of Prosthetic Dentistry. 1978;39:63–67
  39. Brosh T, Pilo R, Bichacho N, Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. Journal of Prosthetic Dentistry. 1997;77:122–126
  40. Cavalcanti AN, de Lima AF, Peris AR, Mitsui FH, Marchi GM. Effect of surface treatments and bonding agents on the bond strength of repaired composites. Journal of Esthetic and Restorative Dentistry. 2007;19:90–98
  41. Chalkley Y, Chan DC. Microleakage between light-cured composites and repairs. Journal of Prosthetic Dentistry. 1986;56:441–444
  42. Chan KC, Boyer DB. Repair of conventional and microfilled composite resins. Journal of Prosthetic Dentistry. 1983;50:345–350
  43. Chiba K, Hosoda H, Fusayama T. The addition of an adhesive composite resin to the same material: bond strength and clinical techniques. Journal of Prosthetic Dentistry. 1989;61:669–675
  44. Crumpler DC, Bayne SC, Sockwell S, Brunson D, Roberson TM. Bonding to resurfaced posterior composites. Dental Materials. 1989;5:417–424
  45. Dias WR, Ritter AV, Swift EJ. Repairability of a packable resin-based composite using different adhesives. American Journal of Dentistry. 2003;16:181–185
  46. Eli I, Liberman R, Levi N, Haspel Y. Bond strength of joined posterior light-cured composites: comparison of surface treatments. Journal of Prosthetic Dentistry. 1988;60:185–189
  47. Frenzel C, Viohl J. Biegefestigkeit von neun Kompositen in Abhängigkeit von verschiedenen Reparaturverfahren. Deutsche Zahnärztliche Zeitschrift. 1994;49:729–732
  48. Gregory WA, Pounder B, Bakus E. Bond strengths of chemically dissimilar repaired composite resins. Journal of Prosthetic Dentistry. 1990;64:664–668
  49. Hisamatsu N, Atsuta M, Matsumura H. Effect of silane primers and unfilled resin bonding agents on repair bond strength of a prosthodontic microfilled composite. Journal of Oral Rehabilitation. 2002;29:644–648
  50. Kao EC, Pryor HG, Johnston WM. Strength of composites repaired by laminating with dissimilar composites. Journal of Prosthetic Dentistry. 1988;60:328–333
  51. Kullmann W. Zur Frage der “Reparatur”- Moglichkeit von Kunststoff- Fullungsmaterialien. Deutsche Zahnärztliche Zeitschrift. 1986;41:200–203
  52. Kupiec KA, Barkmeier WW. Laboratory evaluation of surface treatments for composite repair. Operative Dentistry. 1996;21:59–62
  53. Lewis G, Johnson W, Martin W, Canerdy A, Claburn C, Collier M. Shear bond strength of immediately repaired light-cured composite resin restorations. Operative Dentistry. 1998;23:121–127
  54. Lloyd CH, Baigrie DA, Jeffrey IW. The tensile strength of composite repairs. Journal of Dentistry. 1980;8:171–177
  55. Mitsaki-Matsou H, Karanika-Kouma A, Papadoyiannis Y, Theodoridou-Pahine S. An in vitro study of the tensile strength of composite resins repaired with the same or another composite resin. Quintessence International. 1991;22:475–481
  56. Öztas N, Alacam A, Bardakcy Y. The effect of air abrasion with two new bonding agents on composite repair. Operative Dentistry. 2003;28:149–154
  57. Papacchini F, Dall’Oca S, Chieffi N, Goracci C, Sadek FT, Suh BI, et al. Composite-to-composite microtensile bond strength in the repair of a microfilled hybrid resin: effect of surface treatment and oxygen inhibition. Journal of Adhesive Dentistry. 2007;9:25–31
  58. Pounder B, Gregory WA, Powers JM. Bond strengths of repaired composite resins. Operative Dentistry. 1987;12:127–131
  59. Puckett AD, Holder R, O’Hara JW. Strength of posterior composite repairs using different composite/bonding agent combinations. Operative Dentistry. 1991;16:136–140
  60. Sau CW, Oh GS, Koh H, Chee CS, Lim CC. Shear bond strength of repaired composite resins using a hybrid composite resin. Operative Dentistry. 1999;24:156–161
  61. Saunders WP. Effect of fatigue upon the interfacial bond strength of repaired composite resins. Journal of Dentistry. 1990;18:158–162
  62. Söderholm KJ. Flexure strength of repaired dental composites. Scandinavian Journal of Dental Research. 1986;94:364–369
  63. Söderholm KJ, Roberts MJ. Variables influencing the repair strength of dental composites. Scandinavian Journal of Dental Research. 1991;99:173–180
  64. Swift EJ, Cloe BC, Boyer DB. Effect of a silane coupling agent on composite repair strengths. American Journal of Dentistry. 1994;7:200–202
  65. Swift EJ, LeValley BD, Boyer DB. Evaluation of new methods for composite repair. Dental Materials. 1992;8:362–365
  66. Tezvergil A, Lassila LV, Vallittu PK. Composite–composite repair bond strength: effect of different adhesion primers. Journal of Dentistry. 2003;31:521–525
  67. Turner CW, Meiers JC. Repair of an aged, contaminated indirect composite resin with a direct, visible-light-cured composite resin. Operative Dentistry. 1993;18:187–194
  68. Teixeira EC, Bayne SC, Thompson JY, Ritter AV, Swift EJ. Shear bond strength of self-etching bonding systems in combination with various composites used for repairing aged composites. Journal of Adhesive Dentistry. 2005;7:159–164
  69. Causton BE. Repair of abraded composite fillings. An in vitro study. British Dental Journal. 1975;139:286–288
  70. Seo RS, Neppelenbroek KH, Filho JN. Factors affecting the strength of denture repairs. Journal of Prosthodontics. 2007;16:302–310
  71. Chitchumnong P, Brooks SC, Stafford GD. Comparison of three- and four-point flexural strength testing of denture-base polymers. Dental Materials. 1989;5:2–5
  72. Beyli MS, von Fraunhofer JA. Repair of fractured acrylic resin. Journal of Prosthetic Dentistry. 1980;44:497–503
  73. Dhuru VB, Lloyd CH. The fracture toughness of repaired composite. Journal of Oral Rehabilitation. 1986;13:413–421
  74. Vallittu PK, Lassila VP, Lappalainen Niom R. The effect of notch shape and self-cured acrylic resin repair on the fatigue resistance of an acrylic resin denture base. Journal of Oral Rehabilitation. 1996;23:108–113
  75. Uctasli S. Repair strength of heat-pressed ceramics. Journal of Oral Rehabilitation. 1996;23:139–142
  76. Endo T, Finger WJ, Hoffmann M, Kanehira M, Komatsu M. The role of oxygen inhibition of a self-etch adhesive on self-cure resin composite bonding. American Journal of Dentistry. 2007;20:157–160
  77. Endo T, Osada T, Finger WJ, Hoffmann M, Kanehira M, Komatsu M. Effect of oxygen inhibition of self-etching adhesives on enamel–dentin polymer bond. Journal of Adhesive Dentistry. 2007;9:33–38
  78. Montes GG, Draughn RA. In vitro surface degradation of composites by water and thermal cycling. Dental Materials. 1986;2:193–197
  79. Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. Journal of Dentistry. 1999;27:89–99
  80. Söderholm KJ, Zigan M, Ragan M, Fischlschweiger W, Bergman M. Hydrolytic degradation of dental composites. Journal of Dental Research. 1984;63:1248–1254
  81. Anusavice KJ, Antonson SA. Finishing and polishing materials. In:  Anusavice KJ editors. Phillips’ science of dental materials. 11th ed.. St. Louis: Saunders; 2003;p. 351–377
  82. Rached RN, Powers JM, Del Bel Cury AA. Repair strength of autopolymerizing, microwave, and conventional heat-polymerized acrylic resins. Journal of Prosthetic Dentistry. 2004;92:79–82
  83. Phoenix RD. Denture base resins. In:  Anusavice KJ editors. Phillips’ science of dental materials. 11th ed.. St. Louis: Saunders; 2003;p. 721–757
  84. Harrison WM, Stansbury BE. The effect of joint surface contours on the transverse strength of repaired acrylic resin. Journal of Prosthetic Dentistry. 1970;23:464–472
  85. In:  Powers JM,  Sakaguchi RL editor. Craig's restorative dental materials. 12th ed.. St. Louis: Mosby Elsevier; 2006;
  86. Rawls HR. Dental polymers. In:  Anusavice KJ editors. Phillips’ science of dental materials. 11th ed.. St. Louis: Saunders; 2003;p. 143–169
  87. In:  Kinloch AJ editors. Adhesion and Adhesives. 1st ed.. Madras: Chapman and Hall; 1987;
  88. In:  Van Noort R editors. Introduction to Dental Materials. 3rd ed.. St. Louis: Mosby Elsevier; 2007;
  89. Shen C, Colaizzi FA, Birns B. Strength of denture repairs as influenced by surface treatment. Journal of Prosthetic Dentistry. 1984;52:844–848
  90. Ferracane JL, Condon JR. Post-cure heat treatments for composites: properties and fractography. Dental Materials. 1992;8:290–295
  91. Rawls HR, Esquival-Upshaw J. Restorative Resins. In:  Anusavice KJ editors. Phillips’ science of dental materials. 11th ed.. St. Louis: Saunders; 2003;p. 399–441
  92. Welker D, Rzanny A, Göbel R. Interimsversorgung bei Kronen und Brückenersatz - Indikation, Werkstoffe, biologische Aspekte, Methodik. Quintessenz der Zahntechnik. 1999;25:1133–1144
  93. Söderholm KJ. Water sorption in a bis(GMA)/TEGDMA resin. Journal of Biomedical Materials Research. 1984;18:271–279
  94. Jacobsen T, Söderholm KJ. Some effects of water on dentin bonding. Dental Materials. 1995;11:132–136

PII: S0300-5712(08)00193-0

doi: 10.1016/j.jdent.2008.06.006

Journal of Dentistry
Volume 36, Issue 11 , Pages 861-872 , November 2008

Article Tools

* Image Usage & Resolution