Journal of Dentistry
Volume 36, Issue 9 , Pages 703-710 , September 2008

Influence of artificial saliva on abrasive wear and microhardness of dental composites filled with nanoparticles

  • Camila D. Mayworm

      Affiliations

    • Laboratory of Composite Materials, Metallurgical and Materials Engineering Program (PEMM/COPPE), Federal University of Rio de Janeiro, RJ, Brazil
    • Corresponding Author InformationCorresponding author at: Cid. Universitária, Centro de Tecnologia, Bloco I, sala I-222, Ilha do Fundão, Caixa Postal 68505, Rio de Janeiro, RJ CEP 21941-972, Brazil. Tel.: +55 21 2562 8797/9432 5447; fax: +55 21 2290 1615x235.
    • ,
  • Sérgio S. Camargo Jr.

      Affiliations

    • Laboratory of Surfaces and Thin Films, Metallurgical and Materials Engineering Program (PEMM/COPPE), Federal University of Rio de Janeiro, RJ, Brazil
    • ,
  • Fernando L. Bastian

      Affiliations

    • Laboratory of Composite Materials, Metallurgical and Materials Engineering Program (PEMM/COPPE), Federal University of Rio de Janeiro, RJ, Brazil

Received 26 February 2007 ,Revised 25 April 2008 ,Accepted 1 May 2008.

References 

  1. Leinfelder KF, Suzuki S. In vitro wear device for determining posterior composite wear. The Journal of the American Dental Association. 1999;130:1347–1353
  2. Condon JR, Ferracane JL. Evaluation of composite wear with a new multi-mode oral wear simulator. Dental Materials. 1996;12:218–226
  3. Kawai K, Leinfelder KF. In vitro evaluation of OCA wear resistance of posterior composites. Dental Materials. 1995;11:246–251
  4. Bayne SC, Taylor DF, Heymann HO. Protection hypothesis for composite wear. Dental Materials. 1992;8:305–309
  5. Peutzfeldt A, Asmussen E. Modulus of resilience as predictor for clinical wear of restorative resins. Dental Materials. 1992;8:146–148
  6. Jörgensen KD, Asmussen E. Occlusal abrasion of a composite restorative resin with ultra-fine filler—an initial study. Quintessence International. 1978;9:73–78
  7. Mair LH. Wear in dentistry: current terminology. Journal of Dentistry. 1992;20:140–144
  8. Ferracane JL. Current trends in dental composites. Critical Reviews in Oral Biology and Medicine. 1995;6:302–318
  9. Turssi CP, Ferracane JL, Vogel K. Filler features and their effects on wear and degree of conversion of particulate dental resin composites. Biomaterials. 2005;26:4932–4937
  10. Kim KH, Ong JL, Okuno O. The effect of filler loading and morphology on the mechanical properties of contemporary composites. Journal of Prosthetic Dentistry. 2002;87:642–649
  11. Miyasaka T. Effect of shape and size of silanated fillers on mechanical properties of experimental photo cure composite resins. Dental Materials. 1996;15:98–110
  12. Suzuki S, Leinfelder KL, Kaway K, Tsuchtani Y. Effect of particle variation on wear rates of posterior composites. American Journal of Dentistry. 1995;8:173–178
  13. Braem M, Finger W, Van Doren VE, Lambrechts P, Vanherle G. Mechanical properties and filler fraction of dental composites. Dental Materials. 1989;5:346–349
  14. Söderholm KJ, Richards ND. Wear resistance of composites: a solved problem?. General Dentistry. 1998;46:256–263
  15. Shi G, Zhang MQ, Rong MZ, Wetzel B, Friedrich K. Sliding wear behavior of epoxi containing nano-Al2O3 particles with different pretreatments. Wear. 2004;56:1072–1081
  16. Wetzel B, Haupert F, Zhang MQ. Epoxy nanocomposites with high mechanical and tribological performance. Composites Science and Technology. 2003;63:2055–2067
  17. Wetzel B, Haupert F, Friedrich K, Zhang MQ, Rong MZ. Impact and wear resistance of polymer nanocomposites at low filler content. Polymer Engineering and Science. 2002;42:1919–1927
  18. Zhang MQ, Rong MZ, Yu SL, Wetzel B, Friedrich K. Improvement of tribological performance of epoxy by the addition of irradiation grafted nano-inorganic particles. Macromolecular Materials and Engineering. 2002;287:111–115
  19. Laine RM. Organic–inorganic nanocomposites with completely defined interfacial interactions. Materials Science and Engineering. 2001;13:800–803
  20. Rong MZ, Zhang MQ, Liu H, Zeng HM, Wetzel B, Friedrich K. Microstructure and tribological behavior of polymeric nanocomposites. Industrial Lubrication and Tribology. 2001;53:72–77
  21. Ng CB, Schadler LS, Siegel RW. Synthesis and mechanical properties of TiO2-epoxy nanocomposites. Nanostructured Materials. 1999;12:507–510
  22. Wang Q, Xue Q, Liu W, Shen W, Xu J. The effect of particle size of nanometer ZrO2 on the tribological behaviour of PEEK. Wear. 1996;198:216–219
  23. Martin M, Jedynakiewicz MN, Fisher CA. Hygroscopic expansion and solubility of composite restorative. Dental Materials. 2003;19:77–86
  24. McCabe JF, Rusby S. Water absorption, dimensional change and radial pressure in resin matrix dental restorative materials. Biomaterials. 2003;25:4001–4007
  25. Musanje L, Darvell BW. Aspects of water sorption from the air, water and artificial saliva in resin composite restorative materials. Dental Materials. 2003;19:414–422
  26. Okada K, Tosaki S, Hirota K, Hume WR. Surface hardness change of restorative filling materials stored in saliva. Dental Materials. 2001;17:34–39
  27. Kanchanavasita W, Anstice HM, Pearson GJ. Long-term surface micro-hardness of resin modified glass ionomers. Journal of Dentistry. 1998;26:707–712
  28. Söderholm KJ, Mukherjee R, Longmate J. Filler leachability of composites stored in distilled water or artificial saliva. Journal of Dental Research. 1996;75:1692–1699
  29. Söderholm KJ, Zigan M, Ragan M, Fischlschweiger W, Bergman M. Hydrolytic degradation of dental composites. Journal of Dental Research. 1984;63:1248–1254
  30. Gal J, Fovet Y, Adib-Yadzi M. About a synthetic saliva for in vitro studies. Talanta. 2000;53:1103–1115
  31. Concha ML, Castillo A, Liebana J, Gutierrez J, Garcia A. Initial pH as a determining factor of glucose consumption and lactic and acetic acid production in oral streptococci. Microbios. 1996;87:207–216
  32. Gee MG, Gant A, Hutchings I, Bethke R, Schiffman K, Van Acker K, et al. Progress towards standardization of ball cratering. Wear. 2003;255:1–13
  33. Dang W, Kubouchi M, Sembokuya H, Tsuda K. Chemical recycling of glass fiber reinforced epoxy resin cured with amine using nitric acid. Polymer. 2005;46:1905–1912
  34. Anseth KS, Newman SM, Bowman CN. Polymeric dental composites: properties and reaction behaviour of multimethacrylate dental restorations. Advanced Polymer Science. 1995;122:177–217
  35. Kloosterboer JG. Network formation by chain cross-linking photopolymerisation and its application in electronics. Advanced Polymer Science. 1988;84:1–61

PII: S0300-5712(08)00155-3

doi: 10.1016/j.jdent.2008.05.001

Journal of Dentistry
Volume 36, Issue 9 , Pages 703-710 , September 2008

Article Tools

* Image Usage & Resolution