Journal of Dentistry
Volume 36, Issue 8 , Pages 579-587 , August 2008

Radiopaque dental adhesives: Dispersion of flame-made Ta2O5/SiO2 nanoparticles in methacrylic matrices

  • Heiko Schulz

      Affiliations

    • Department of Mechanical and Process Engineering, ETH Zurich, Switzerland
    • ,
  • Bjoern Schimmoeller

      Affiliations

    • Department of Mechanical and Process Engineering, ETH Zurich, Switzerland
    • ,
  • Sotiris E. Pratsinis

      Affiliations

    • Department of Mechanical and Process Engineering, ETH Zurich, Switzerland
    • Corresponding Author InformationCorresponding author at: Particle Technology Laboratory, ETH Zurich, Sonneggstr. 3, ML F13 8092 Zurich, Switzerland. Tel.: +41 44 632 3180; fax: +41 44 632 1595.
    • ,
  • Ulrich Salz

      Affiliations

    • Ivoclar Vivadent AG, Schaan, Liechtenstein
    • ,
  • Thorsten Bock

      Affiliations

    • Ivoclar Vivadent AG, Schaan, Liechtenstein

Received 8 October 2007 ,Revised 6 April 2008 ,Accepted 8 April 2008.

References 

  1. Mjor IA, Moorhead JE, Dahl JE. Reasons for replacement of restorations in permanent teeth in general dental practice. International Dental Journal. 2000;50:361–366
  2. Labella R, Lambrechts P, Van Meerbeek B, Vanherle G. Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dental Materials. 1999;15:128–137
  3. Irie M, Suzuki K. Marginal gap formation of light-activated base/liner materials: effect of setting shrinkage and bond strength. Dental Materials. 1999;15:403–407
  4. Mjor IA, Toffenetti OF. Secondary caries: a literature review with case reports. Quintessence International. 2000;31:165–179
  5. Mjor IA. Clinical diagnosis of recurrent caries. Journal of the American Dental Association. 2005;136:1426–1433
  6. Nicholson JW. Adhesive dental materials—a review. International Journal of Adhesion and Adhesives. 1998;18:229–236
  7. Espelid I, Tveit AB, Erickson RL, Keck SC, Glasspoole EA. Radiopacity of restorations and detection of secondary caries. Dental Materials. 1991;7:114–117
  8. Hewlett ER, Atchison KA, White SC, Flack V. Radiographic secondary caries prevalence in teeth with clinically defective restorations. Journal of Dental Research. 1993;72:1604–1608
  9. Haak R, Wicht MJ, Hellmich M, Noack MJ. Detection of marginal defects of composite restorations with conventional and digital radiographs. European Journal of Oral Sciences. 2002;110:282–286
  10. Schulze R. Digitales Röntgen in der Zahnheilkunde. Zahnarzt Ärzte Woche. 2003;6:336–346
  11. Opdam NJM, Roeters FJM, Feilzer AJ, Smale I. A radiographic and scanning electron microscopic study of approximal margins of Class II resin composite restorations placed in vivo. Journal of Dentistry. 1998;26:319–327
  12. Akinmade AO, Nicholson JW. Effect of adhesive layer thickness on the bond strength of a zinc polycarboxylate dental cement. Biomaterials. 1995;16:149–154
  13. Lee YK, Pinzon LM, O’Keefe KL, Powers JM. Effect of filler addition on the bonding parameters of dentin bonding adhesives bonded to human dentin. American Journal of Dentistry. 2006;19:23–27
  14. Tay FR, Moulding KM, Pashley DH . Distribution of nanofillers from a simplified-step adhesive in acid-conditioned dentin. The Journal of Adhesive Dentistry. 1999;1:103–117
  15. Moszner N, Salz U, Zimmermann J. Chemical aspects of self-etching enamel–dentin adhesives: a systematic review. Dental Materials. 2005;21:895–910
  16. Nicholson JW. Adhesive dental materials and their durability. International Journal of Adhesion and Adhesives. 2000;20:11–16
  17. Frankenberger R, Lopes M, Perdigao J, Ambrose WW, Rosa BT. The use of flowable composites as filled adhesives. Dental Materials. 2002;18:227–238
  18. Schulz H, Mädler L, Pratsinis SE, Burtscher P, Moszner N. Transparent nanocomposites of radiopaque, flame-made Ta2O5/SiO2 particles in an acrylic matrix. Advanced Functional Materials. 2005;15:830–837
  19. Ikejima I, Nomoto R, McCabe JF. Shear punch strength and flexural strength of model composites with varying filler volume fraction, particle size and silanation. Dental Materials. 2003;19:206–211
  20. Wissler M, Lusti HR, Oberson C, Widmann-Schupak AH, Zappini G, Gusev AA. Non-additive effects in the elastic behavior of dental composites. Advanced Engineering Materials. 2003;5:113–116
  21. Glasel HJ, Bauer F, Ernst H, Findeisen M, Hartmann E, Langguth H, et al. Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles. 2. Characterization of radiation-cured polymeric nanocomposites. Macromolecular Chemistry and Physics. 2000;201:2765–2770
  22. Lee JH, Um CM, Lee IB. Rheological properties of resin composites according to variations in monomer and filler composition. Dental Materials. 2006;22:515–526
  23. Pratsinis SE. Flame aerosol synthesis of ceramic powders. Progress in Energy and Combustion Science. 1998;24:197–219
  24. Mädler L, Krumeich F, Burtscher P, Moszner N. Transparent and radiopaque inorganic organic composites from flame-made mixed oxide fillers. Journal of Nanoparticle Research. 2006;8:323–333
  25. Barna E, Bommer B, Kursteiner J, Vital A, von Trzebiatowski O, Koch W, et al. Innovative, scratch proof nanocomposites for clear coatings. Composites Part A-Applied Science and Manufacturing. 2005;36:473–480
  26. Mueller R, Kammler HK, Pratsinis SE, Vital A, Beaucage G, Burtscher P. Non-agglomerated dry silica nanoparticles. Powder Technology. 2004;140:40–48
  27. Klapdohr S, Moszner N. New inorganic components for dental filling composites. Monatshefte Fur Chemie. 2005;136:21–45
  28. Pohl M, Schubert H, Schuchmann HP. Production of stable dispersions from pyrogenic silicic acid. Chemie Ingenieur Technik. 2005;77:258–262
  29. Pohl M, Hogekamp S, Hoffmann NQ, Schuchmann HP. Dispersion and deagglomeration of nanoparticles with ultrasound. Chemie Ingenieur Technik. 2004;76:392–396
  30. Wengeler R, Teleki A, Vetter M, Pratsinis SE, Nirschl H. High-pressure liquid dispersion and fragmentation of flame-made silica agglomerates. Langmuir. 2006;22:4928–4935
  31. Jesionowski T, Bula K, Janiszewski J, Jurga J. The influence of filler modification on its aggregation and dispersion behaviour in silica/PBT composite. Composite Interfaces. 2003;10:225–242
  32. Taira M, Toyooka H, Yamaki M. Preparation of radiopaque SiO2–BaO fillers by the sol–gel process for dental composite resins. British Ceramic Transactions. 1994;93:21–24
  33. Furman B, Rawls HR, Wellinghoff S, Dixon H, Lankford J, Nicolella D. Metal-oxide nanoparticles for the reinforcement of dental restorative resins. Critical Reviews in Biomedical Engineering. 2000;28:439–443
  34. Chan DCN, Titus HW, Chung KH, Dixon H, Wellinghoff ST, Rawls HR. Radiopacity of tantalum oxide nanoparticle filled resins. Dental Materials. 1999;15:219–222
  35. Schulz H, Pratsinis SE, Rüegger H, Zimmermann J, Klapdohr S, Salz U. Surface functionalization of radiopaque Ta2O5/SiO2 for nanocomposites. Colloids and Surfaces A. 2008;315:79–88
  36. Moszner N, Zeuner F, Pfeiffer S, Schurte I, Rheinberger V, Drache M. Monomers for adhesive polymers. 3. Synthesis, radical polymerization and adhesive properties of hydrolytically stable phosphonic acid monomers. Macromolecular Materials and Engineering. 2001;286:225–231
  37. Gaur U, Lau S, Wunderlich BB, Wunderlich B. Heat capacity other thermodynamic properties of linear macromolecules. VI. Acrylic polymers. Journal of Physical and Chemical Reference Data. 1982;11:1065–1089
  38. Cosgrove T. Colloid science: principles, methods and applications. Oxford: Bleckwell Publishing; 2005;
  39. Bowen P. Particle size distribution measurement from millimeters to nanometers, and from rods to platelets. Journal of Dispersion Science and Technology. 2002;23:631–662
  40. Say EC, Nakajima M, Senawongse P, Soyman M, Ozer F, Ogata M, et al. Microtensile bond strength of a filled vs. unfilled adhesive to dentin using self-etch and total-etch technique. Journal of Dentistry. 2006;34:283–291
  41. Larson RG. The structure and rheology of complex fluids. New York: Oxford University Press; 1999;
  42. Popa AM, Vleugels J, Vermant J, Van der Biest O. Influence of surfactant addition sequence on the suspension properties and electrophoretic deposition behaviour of alumina and zirconia. Journal of the European Ceramic Society. 2006;26:933–939
  43. Degussa. Schriftenreihe fine particles: Degussa Aerosil and Silanes;2006.
  44. Singh BP, Menchavez R, Takai C, Fuji M, Takahashi M. Stability of dispersions of colloidal alumina particles in aqueous suspensions. Journal of Colloid and Interface Science. 2005;291:181–186
  45. Rheinberger V, Moszner N, Fischer UK; Filled and polymerizable dental material. 1999;August 10.
  46. Kwade A, Schwedes J. Breaking characteristics of different materials and their effect on stress intensity and stress number in stirred media mills. Powder Technology. 2002;122:109–121
  47. Chen H, Zhou SX, Gu GX, Wu LM. Study on modification and dispersion of nano-silica. Journal of Dispersion Science and Technology. 2005;26:27–37
  48. Bauer F, Sauerland V, Ernst H, Glasel HA, Naumov S, Mehnert R. Preparation of scratch- and abrasion-resistant polymeric nanocomposites by monomer grafting onto nanoparticles. 4. Application of MALDI-TOF mass spectrometry to the characterization of surface modified nanoparticles. Macromolecular Chemistry and Physics. 2003;204:375–383
  49. Heine MC, Pratsinis SE. High concentration agglomerate dynamics at high temperatures. Langmuir. 2006;22:10238–10245
  50. Fonseca RB, Branco CA, Soares PV, Correr-Sobrinho LO, Haiter-Neto F, Fernandes-Neto AJ, et al. Radiodensity of base, liner and luting dental materials. Clinical Oral Investigations. 2006;10:114–118
  51. Puttaswamy KS, Gowda R, Sanjeevaiah B. Photoeffect cross-sections in Al, S, Cu, Zr, Ag, Sn, Ta, Au, and Pb at 31.7-keV, 74.8-keV, 81.0-keV, and 145.0-keV, derived from total attenuation measurements. Canadian Journal of Physics. 1981;59:22–24
  52. Hubbell JH. Photon mass attenuation and energy–absorption coefficients from 1keV to 20MeV. International Journal of Applied Radiation and Isotopes. 1982;33:1269–1290
  53. Halvorson RH, Erickson RL, Davidson CL. The effect of filler and silane content on conversion of resin-based composite. Dental Materials. 2003;19:327–333
  54. Li FS, Zhou SX, Wu LM. Preparation and characterization of UV-curable MPS-modified silica nanocomposite coats. Journal of Applied Polymer Science. 2005;98:2274–2281
  55. Akinmade AO, Nicholson JW. Poisson's ratio of glass-polyalkenoate (glass-ionomer) cements determined by an ultrasonic pulse method. Journal of Materials Science-Materials in Medicine. 1995;6:483–485
  56. Bae JH, Cho BH, Kim JS, Kim MS, Lee IB, Son HH, et al. Adhesive layer properties as a determinant of dentin bond strength. Journal of Biomedical Materials Research Part B-Applied Biomaterials. 2005;74B:822–828
  57. Mohsen NM, Craig RG. Effect of silanation of fillers on their dispersability by monomer systems. Journal of Oral Rehabilitation. 1995;22:183–189

PII: S0300-5712(08)00128-0

doi: 10.1016/j.jdent.2008.04.010

Journal of Dentistry
Volume 36, Issue 8 , Pages 579-587 , August 2008

Article Tools

* Image Usage & Resolution