« Previous
Next »
Journal of Dentistry
Volume 34, Issue 7
, Pages 420-426
, August 2006
Effect of relining, water storage and cyclic loading on the flexural strength of a denture base acrylic resin
References
- . The continuing reduction of the residual alveolar ridges in complete denture wearers: a mixed- longitudinal study covering 25 years. Journal of Prosthetic Dentistry. 1972;27:121–132
- . Flexural strength at the proportional limit of a denture base material relined with four different denture reline material. International Journal of Prosthodontics. 1997;10:508–512
- . Properties of highly cross-linked autopolymerizing reline acrylic resins. Journal of Prosthetic Dentistry. 1995;73:55–59
- . Bond strength and failure analysis of lining materials to denture resin. Dental Materials. 1999;15:211–218
- . Water sorption, solubility, and bond strength of two autopolymerizing acrylic resins and one heat-polymerizing acrylic resin. Journal of Prosthetic Dentistry. 1998;80:434–438
- . A comparison of three hard chairside denture reline materials. Part I. Clinical evaluation. European Journal of Prosthodontics and Restorative Dentistry. 2003;11:157–163
- . Analysis of composition and structure of hard autopolymerizing reline resins. Journal of Oral Rehabilitation. 1996;23:346–352
- . Polymerization characteristics of EMA-based resin. Dental Materials Journal. 2004;23:14–18
- . Leaching and cytotoxicity of formaldehyde and methyl methacrylate from acrylic resin denture base materials. Journal of Prosthetic Dentistry. 1994;71:618–624
- . Clinical evaluation of a chemically cured hard denture relining material. Journal of Oral Rehabilitation. 2001;28:640–644
- . Effect of microwave disinfection on the flexural strength of hard chairside reline resins. Journal of Dentistry. 2005;33:741–748
- . Flexural strength of auto-polymerizing denture reline resins with microwave post-polymerization treatment. Journal of Prosthetic Dentistry. 2005;93:577–583
- . Flexural strength of rebased denture polymers. Journal of Oral Rehabilitation. 2000;27:690–696
- . Effect of water sorption on the resistance to plastic deformation of a denture base material relined with four different denture reline materials. International Journal of Prosthodontics. 1998;11:49–54
- . Tensile fatigue limits of prosthodontic adhesives. Journal of Dental Research. 1991;70:208–210
- . Mechanical property evaluation of pressable restorative ceramics. Dental Materials. 2000;16:226–233
- . Tensile fatigue strength of light cure composite resins for posterior teeth. Dental Materials. 1995;14:175–184
- . The flexural strengths of denture base acrylic resins after relining with a visible-light-activated material. International Journal of Prosthodontics. 1998;11:121–124
- . An evaluation of self-cured and visible light-cured denture base materials when used as a denture base repair material. Journal of Oral Rehabilitation. 1997;24:755–760
- International Standards Organization. ISO 1567 for denture base polymers. Geneva: ISO, 1998. Available at: http://www.iso.ch/iso/en/prods-service/ISOstore/store.html.
- . Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin. International Journal of Prosthodontics. 2001;14:531–535
- . Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment. Journal of Oral Rehabilitation. 2001;28:1153–1157
- . Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin. Journal of Prosthetic Dentistry. 1994;72:639–643
- . Effect of simulated resin-bonded fixed partial denture clinical conditions on resin cement mechanical properties. Journal of Oral Rehabilitation. 2003;30:837–846
- . Composition and effect of denture base resin surface primers for reline acrylic resins. Journal of Prosthetic Dentistry. 1996;75:457–462
- . The determination of residual monomer in polymethylmethacrylate denture-base resins. Journal of Materials Science. 1978;13:2600–2604
- . The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. Journal of Dentistry. 1995;23:313–318
- . Effect of the curing cycle on residual monomer levels of acrylic resin denture base polymers. Journal of Dentistry. 1992;20:370–374
- . Effect of polymerization temperature and time on the residual monomer content of denture base polymers. European Journal of Oral Sciences. 1998;106:588–593
- . Strength of denture repairs as influenced by surface treatment. Journal of Prosthetic Dentistry. 1984;52:844–848
- . Equilibrium strengths of denture polymers subjected to long-term water immersion. International Journal of Prosthodontics. 1999;12:348–352
- . Loss into water of residual monomer from autopolymerizing dental acrylic resin. Biomaterials. 1982;3:155–159
- . Fatigue failure in denture base polymers. Journal of Prosthetic Dentistry. 1969;21:257–266
- . Flexure properties of denture base polymers. Journal of Prosthetic Dentistry. 1980;43:95–104
- . Flexure fatigue of 10 commonly used denture base resins. Journal of Prosthetic Dentistry. 1981;46:478–483
- . Fatigue properties of acrylic denture base resins. Dental Materials Journal. 1989;8:243–259
- . Monotonic flexure and fatigue strength of composites for provisional and definitive restorations. Journal of Prosthetic Dentistry. 2003;89:579–588
PII: S0300-5712(05)00180-6
doi: 10.1016/j.jdent.2005.10.001
© 2005 Elsevier Ltd. All rights reserved.
« Previous
Next »
Journal of Dentistry
Volume 34, Issue 7
, Pages 420-426
, August 2006
