Journal of Dentistry
Volume 34, Issue 4 , Pages 298-306 , April 2006

Influence of heat from light curing units and dental composite polymerization on cells in vitro

  • Alexander Uhl

      Affiliations

    • Electro Medical Systems (EMS) SA, Chemin de la Vuarpillière 31, CH-1260 Nyon, Switzerland
    • Corresponding Author InformationCorresponding author. Tel.: +41 79 20 789 28; fax: +41 22 99 42 699.
  • ,
  • Andrea Völpel

      Affiliations

    • Department of Conservative Dentistry, Friedrich-Schiller-University Jena, An der Alten Post 4, D-07743 Jena, Germany
  • ,
  • Bernd W. Sigusch

      Affiliations

    • Department of Conservative Dentistry, Friedrich-Schiller-University Jena, An der Alten Post 4, D-07743 Jena, Germany

Received 11 March 2005 ,Revised 30 June 2005 ,Accepted 18 July 2005.

References 

  1. Zach L, Cohen G. Pulp response to externally applied heat. Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontics. 1965;19:515–530
  2. Lisani VF, Zander HA. Thermal injury to normal dog teeth: in vivo measurements of pulp temperature increases and their effect on the pulp tissue. Journal of Dental Research. 1952;31:548–558
  3. Ottl P, Lauer HC. Temperature response in the pulpal chamber during ultrahigh-speed tooth preparation with diamond burs with different grit. Journal of Prosthetic Dentistry. 1998;80:12–19
  4. Zach L, Cohen G. Thermogenesis in operative techniques. Comparison of four methods. Journal of Prosthetic Dentistry. 1962;12:977–984
  5. Carson J, Rider T, Nash D. A thermographic study of heat distribution during ultra-speed cavity preparation. Journal of Dental Research. 1979;58:1681–1684
  6. Ulusoy N, Nilufer D, Atakul F, Nayyar A. Thermal response to multiple use of twist drill. Journal of Prosthetic Dentistry. 1992;67:450–453
  7. Cooley RL, Barkmeier WW. Temperature rise in the pulp chamber caused by twist drills. Journal of Prosthetic Dentistry. 1980;44:426–429
  8. Nicoll BK, Peters RJ. Heat generation during ultrasonic instrumentation of dentin as affected by different irrigation methods. Journal of Periodontology. 1998;69:884–888
  9. Blankenau RJ, Kelsey WP, Powell GL, Cavel WT, Anderson DM. Power density and external temperature of laser-treated root canals. Journal of Clinical Laser Medicine & Surgery. 1994;12:17–19
  10. Cavalcanti BN, Lage-Marques JL, Rode SM. Pulpal temperature increases with Er:YAG laser and high-speed handpieces. Journal of Prosthetic Dentistry. 2003;90:447–451
  11. Rizoiu I, Kohanghadosh F, Kimmel AI, Eversole LR. Pulpal thermal responses to an erbium, chromium: YSGG pulsed laser hydrokinetic system. Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontics. 1998;86:220–223
  12. Cummingss M, Biagioni P, Lamey PJ, Burden DJ. Thermal image analysis of electrothermal debonding of ceramic brackets: an in vitro study. European Journal of Orthodontics. 1999;21:111–118
  13. Ruppenthal T, Baumann MA. A temperature rise in the dental pulp during the electrothermal removal of ceramic brackets. Fortschritte der Kieferorthopädie. 1992;21:111–118
  14. Jost-Brinkmann PG, Radlanski RJ, Artun J, Loidl HH. Risk of pulp damage due to temperature increase during thermodebonding of ceramic brackets. European Journal of Orthodontics. 1997;19:623–628
  15. Baik JW, Rueggeberg FA, Liewehr FR. Effect of light-enhanced bleaching on in vitro surface and intrapulpal temperature rise. Journal of Esthetic and Restorative Dentistry. 2001;13:370–378
  16. Whalen SR, Bouschlicher MR. Intrapulpal temperature increases with temporary crown and bridge materials. IADR/AADR/CADR 80th general session, Gothenburg, Sweden. 2002;(0517)
  17. Sernetz F, Kraut J. Laboratory evaluations on thermal debonding of ceramic brackets. Journal of Clinical Dentistry. 1991;2:87–91
  18. Barlattani A, Cardelli P, Cioccolanti F, Gallio M. Polymerization of exothermal reaction of dental prosthetic resin for temporary crowns. A comparative evaluation. Minerva Stomatologica. 2002;51:11–20
  19. Shortall AC, Harrington E. Temperature rise during polymerization of light-activated resin composites. Journal of Oral Rehabilitation. 1998;25:908–913
  20. Uhl A, Mills RW, Jandt KD. Polymerization and light-induced heat of dental composites cured with LED and halogen technology. Biomaterials. 2003;24:1809–1820
  21. Peutzfeld A, Sahafi A, Asmussen E. Characterization of resin composites polymerized with plasma arc curing units. Dental Materials. 2000;16:330–336
  22. Loney RW, Price RB. Temperature transmission of high-output light-curing units through dentin. Operative Dentistry. 2001;(26):516–520
  23. Fano L, Ma WY, Marcoli PA, Pizzi S, Fano V. Polymerization of dental composite resins using plasma light. Biomaterials. 2002;23:1001–1015
  24. Baldissara P, Catapano S, Scotti R. Clinical and histological evaluation of thermal injury thresholds in human teeth: a preliminary study. Journal of Oral Rehabilitation. 1997;25:435–440
  25. Pohto M, Scheinin A. Vital microscopy of the pulp in the rat incisor. VII. Reactions to silicate cements. Acta Odontologica Scandinavica. 1958;31:548–558
  26. Moin C, Nomura Y, Urabe H, Okazaki M, Shintani H. The relationship between leachability of polymerization initiator and degree of conversion of visible-cured resin. Journal of Biomedical Materials Research. 2001;58:42–46
  27. Spahl W, Budzikiewicz H, Geurtsen W. Determination of leachable components from commercial dental composites by gas and liquid chromatography/mass spectrometry. Journal of Dentistry. 1998;26:137–145
  28. Wataha JC, Hanks CT, Strawn SE, Fat JC. Cytotoxicity of components of resins and other dental restorative materials. Journal of Oral Rehabilitation. 1994;21:453
  29. Franz A, Konig F, Anglmayer M, Rausch-Fan X, Gille G, Rausch WD, et al. Cytotoxic effects of packable and nonpackable dental composites. Dental Materials. 2003;19:382–392
  30. Cook WD. Curing efficiency and ocular hazards of dental photopolymerization sources. Biomaterials. 1986;7:449–454
  31. Chadwick RG, Traynor N, Moseley H, et al. Blue-light curing units—a dermatological hazard. British Dental Journal. 1994;176:17–21
  32. Bassiouny MA, Grant AA. A visible light-cured composite restorative. British Dental Journal. 1978;145:327–330
  33. Wataha JC, Lockwood PE, Lewis JB, Rueggeberg FR, Messer RLW. Biological effects of blue light from dental curing units. Dental Materials. 2004;(20):150–157
  34. Greiwe K, Schottner G. ORMOCERe: Eine neue Werkstoffklasse. FhG-Berichte. 1990;2:64
  35. Schmalz G, Schuster U, Nuetzel K, Schweikl H. An in vitro pulp chamber with three-dimensional cell cultures. Journal of Endodontics. 1999;25:24–29
  36. Schmalz G, Garhammer P, Schweiki H. A commercially available cell culture device modified for dentin barrier tests. Journal of Endodontics. 1996;22:249–252
  37. Matsuyama T, Izumi Y, Sueda T. Culture and characterization of human junctional epithelial cells. Journal of Periodontology. 1997;68:229–239
  38. Jandt KD, Mills RW, Blackwell GB, Ashworth SH. Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs). Dental Materials. 2000;(16):41–47
  39. Yoon TH, Lee YK, Lim BS, Kim CW. Degree of polymerization of resin composites by different light sources. Journal of Rehabilitation. 2002;29:1165–1173
  40. Moon HJ, Lee YK, Lim BS, Kim CW. Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin. Journal of Oral Rehabilitation. 2004;31:258–264
  41. Uhl A, Mills RW, Jandt KD. Photoinitiator dependent composite depth of cure and Knoop hardness with halogen and LED light curing units. Biomaterials. 2002;24:1787–1795
  42. Uhl A, Mills RW, Rzanny AE, Jandt KD. Time dependence of composite shrinkage using halogen and LED light curing. Dental Materials. 2005;21:278–286
  43. Tissieres A, Mitchel HK, Tracy UM. Protein synthesis in salivary of Drosophila melanogaster: relation to chromosome puffs. Journal of Molecular Biology. 1974;84:389–398
  44. Brown WS, Dewey WA, Jacobs HR. Thermal properties of teeth. Journal of Dental Research. 1970;49:752–755
  45. Manufacturer: Goodfellow SARL, 59000 Lille, France.

PII: S0300-5712(05)00148-X

doi: 10.1016/j.jdent.2005.07.004

Journal of Dentistry
Volume 34, Issue 4 , Pages 298-306 , April 2006