Journal of Dentistry
Volume 34, Issue 3 , Pages 221-229 , March 2006

Evaluation of a reinforced slot design for CEREC system to restore extensively compromised premolars

  • Chun-Li Lin

      Affiliations

    • Department of Mechanical Engineering, Graduate Institute of Medical Mechatronics, Chang Gung University, 259 Wen-Hua 1st Road, Kwei-Shan, Tao-Yuan 333, Taiwan
    • Corresponding Author InformationCorresponding author. Tel.: +886 3 211 8800x5759; fax: +886 3 211 8700.
    • ,
  • Yen-Hsiang Chang

      Affiliations

    • Operative Dentistry, Chang Gung Memorial Hospital, 5, Fu-Hsing St., Kuei-Shan, Tao-Yuan, Taiwan
    • Tel.: +886 3 328 1200x8328; fax: +886 3 327 8928.
    • ,
  • Wen-Jen Chang

      Affiliations

    • Department of Industrial Engineering and Management, Ta-Hwa Institute of Technology, No. 1 Ta-Hwa Road, Hsiung-Lin, Hsinchu County, 307, Taiwan
    • Tel.: +886 3 592 7700x2959; fax: +886 3 592 6848.
    • ,
  • Ming-Hsiang Cheng

      Affiliations

    • Graduate Institute of Medical Mechatronics, Chang Gung University, 259 Wen-Hua 1st Road, Kwei-Shan, Tao-Yuan 333, Taiwan
    • Tel: +886 3 211 8800x3197; fax: +886 3 211 8700.

Received 1 March 2004 ,Revised 16 May 2005 ,Accepted 19 May 2005.

References 

  1. Modelli J, Steagall L, Ishikiriama A, de Lima Navarro MF, Soares FB. Fracture strength of human teeth with cavity preparations. Journal of Prosthetic Dentistry. 1980;43:419–422
  2. Blaser PK, Lund MR, Cochran MA, Potter RH. Effect of designs of class 2 preparations on resistance of teeth to fracture. Operative Dentistry. 1983;8:6–10
  3. Khera SC, Goel VK, Chen RC, Gurusami SA. Parameters of MOD cavity preparations: a 3-D FEM study, part II. Operative Dentistry. 1991;16:42–54
  4. Toparli M, Gokay N, Aksoy T. Analysis of a restored maxillary second premolar tooth by using three-dimensional finite element method. Journal of Oral Rehabilitation. 1999;26:157–164
  5. Lin CL, Chang CH, Ko CC. Multifactorial analysis of an MOD-restored human premolar using auto-mesh finite element approach. Journal of Oral Rehabilitation. 2001;28:576–585
  6. Lin CL, Chang CH, Wang CH, Ko CC, Lee HE. Numerical investigation of the factors affecting interfacial stresses in an MOD restored tooth by auto-meshed finite element method. Journal of Oral Rehabilitation. 2001;28:517–525
  7. Al-Hiyasat AS, Saunders WP, Sharkey SW, Smith GM, Gilmour WH. Investigation of human enamel wear against four dental ceramics and gold. Journal of Dentistry. 1998;26:487–495
  8. Chen HY, Hickel R, Setcos JC, Kunzelmann KH. Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns. Journal of Prosthetic Dentistry. 1999;82:468–475
  9. Martin N, Jedynakiewicz NM. Clinical performance of CEREC ceramic inlays: a systematic review. Dental Materials. 1999;15:54–61
  10. Denissen H, Dozic A, van der Zel J, van Waas M. Marginal fit and short-term clinical performance of porcelain-veneered CICERO, CEREC, and Procera onlays. Journal of Prosthetic Dentistry. 2000;84:506–513
  11. Martin N, Jedynakiewicz NM. Interface dimensions of CEREC-2 MOD inlays. Dental Materials. 2000;6:68–74
  12. Goel VK, Khera SC, Gurusami S, Chen RC. Effect of cavity depth on stresses in a restored tooth. Journal of Prosthetic Dentistry. 1992;67:174–183
  13. Gorucu J, Tiritoglu M, Ozgunaltay G. Effects of preparation designs and adhesive systems on retention of class II amalgam restorations. Journal of Prosthetic Dentistry. 1997;78:250–254
  14. Opdam NJ, Roeters JJ, Kuijs R, Burgersdijk RC. Necessity of bevels for box only class II composite restorations. Journal of Prosthetic Dentistry. 1998;80:274–279
  15. Lin CL, Chang CH, Cheng CS, Wang CH, Lee HE. Automatic finite element mesh generation for maxillary second premolar. Computer Methods and Programs in Biomedicine. 1999;59:187–195
  16. Khera SC, Goel VK, Chen RC, Gurusami SA. A three-dimensional finite element model. Operative Dentistry. 1988;3:128–136
  17. Boresi AP, Shmidt RJ, Sidebottom OM. Advanced mechanics of materials. New York: Wiley; 1993;p. 32–35
  18. Ko CC, Chu CS, Chung KH, Lee MC. Effects of posts on dentin stress distribution in pulpless teeth. Journal of Prosthetic Dentistry. 1992;68:421–427
  19. Lin CL, Lee HE, Wang CH, Chang KH. Integration of CT, CAD system and finite element method to investigate interfacial stresses of resin-bonded prosthesis. Computer Methods and Programs in Biomedicine. 2003;72:55–64
  20. Farah JW, Craig RG, Meroueh KA. Finite element analysis of three- and four- unit bridges. Journal of Oral Rehabilitation. 1989;16:603–611
  21. Benzing UR, Gall H, Weber H. Biomechanical aspects of two different implant-prosthetic concepts for edentulous maxillae. International Journal of Oral Maxillofacial Implants. 1995;10:188–198
  22. Fischer H, Dautzenberg G, Marx R. Nondestructive estimation of the strength of dental ceramic materials. Dental Materials. 2001;17:289–295
  23. Kelly JR, Tesk JA, Sorensen JA. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. Journal of Dental Research. 1995;74:1253–1258
  24. Angelides M, Shirazi-Adl A, Shrivastava SC, Ahmed AM. A stress compatible finite element for implant/cement interface analyses. Journal of Biomechanical Engineering. 1988;110:42–49

PII: S0300-5712(05)00123-5

doi: 10.1016/j.jdent.2005.05.009

Journal of Dentistry
Volume 34, Issue 3 , Pages 221-229 , March 2006

Article Tools

* Image Usage & Resolution