Journal of Dentistry
Volume 30, Issue 4 , Pages 153-160 , May 2002

The effect of surface roughness on the flexure strength of an alumina reinforced all-ceramic crown material

Received 15 July 2002 ,Revised 20 July 2002 ,Accepted 26 July 2002.

References 

  1. McLean JW, Kedge MI. High-strength ceramics. Quintessence Int. 1987;18:97–106
  2. Marquis PM. The influence of cements on the mechanical performance of dental ceramics. Proc Fifth Int Symp Ceram Med, Bioceram. 1992;5:317–324
  3. Kelly JR, Campbell SD, Bowen HK. Fracture-surface analysis of dental ceramics. J Prosthet Dent. 1989;62:652–661
  4. Fleming GJP, Shelton RM, Marquis PM. The influence of clinically induced variability on the bi-axial fracture strength of aluminous core porcelain discs. J Dent. 1999;27:587–594
  5. Anusavice KJ, Hojjatie B. Tensile stresses in glass–ceramic crowns: effect of flaws and cement voids. Int J Prosthodont. 1992;5:351–358
  6. Marquis PM, Wilson HJ. A tooth for a tooth—ceramics in modern dentistry. Chem Ind. 1986;657–661
  7. Gorman CM, McDevitt WE, Hill RG. Comparison of two heat-pressed all-ceramic dental materials. Dent Mater. 2000;16:389–395
  8. Josephson BA, Schulman A, Dunn ZA, Hurwitz W. A compressive strength study of complete ceramic crowns. Part II. J Prosthet Dent. 1991;65:388–391
  9. Ferro KJ, Myers ML, Graser GN. Fracture strength of full-contoured ceramic crowns and porcelain-veneered crowns of ceramic copings. J Prosthet Dent. 1994;71:462–467
  10. Hornberger H. Strength microstructure relationships in a dental alumina glass composite. PhD Thesis, The University of Birmingham; 1995.
  11. McLean JW. The development of ceramic oxide reinforced dental porcelains with an appraisal of their physical and chemical properties. MDS Thesis, University of London; 1966.
  12. Lehner C, Struder S, Schärer P. Seven year results of leucite-reinforced glass–ceramic crowns. J Dent Res. 1998;77:802; Abstr. No. 1369
  13. Malament KA, Socransky SS. Survival of Dicor glass–ceramic dental restorations over 14 years: Part I. Survival of Dicor complete coverage restorations and effect of internal surface acid etching, tooth position, gender, and age. J Prosthet Dent. 1999;81:23–32
  14. Sjögren G, Lantto R, Granberg A, Sundström BO, Tillberg A. Clinical examination of leucite reinforced glass–ceramic crowns (Empress) in general practise: a retrospective study. Int J Prosthodont. 1999;12:122–128
  15. Thompson JY, Anusavice KJ, Naman A, Morris HF. Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res. 1994;73:1824–1832
  16. Fleming GJP, Shelton RM, Marquis PM. The influence of clinically induced variability on the bi-axial fracture strength of cemented aluminous core porcelain discs. Dent Mater. 1999;15:62–70
  17. Fleming GJP, Narayan O. The effect of cement type and mixing on the bi-axial fracture strength of cemented aluminous core porcelain discs. Dent Mater. 2002; in press
  18. Yakamura Y, Anusavice KJ. Effect of surface roughness on the Weibull distribution of porcelain strength. J Dent Res. 1997;76:419; Abstr. No. 3248
  19. Yakamura Y, Sato H, Akao Y, Shiraki N, Kawashima N, Ammi S. Journal of Dental Research. 2001;79:557; Abstr. No. 247
  20. Williams PD, Smith DC. Measurement of tensile strength of dental restorative materials by use of a diametral compression test. J Dent Res. 1971;50:436–442
  21. Rudnick A, Hunter AR, Holden FC. An analysis of the diametral-compression test. Mater Res Standards. 1963;3:283–289
  22. Wright PJF. Comments on an indirect tensile test on concrete cylinders. Mag Concrete Res. 1955;1:87–96
  23. Earnshaw R, Smith DC. The tensile and compressive strength of plaster and stone. Aust Dent J. 1966;11:415–422
  24. Anusavice KJ, Lee RB. Effect of firing temperature and water exposure on crack propagation in unglazed porcelain. J Dent Res. 1989;68:1075–1081
  25. Timoshenko S, Woinowsky-Krieger S. Theory of plates and shells. 2nd ed. Theory of plates and shells. 1959; Chapter 3, p. 51–78
  26. Anusavice KJ, DeHoff PH, Fairhurst EW. Comparative evaluation of ceramic-metal bond tests using finite element analysis. J Dent Res. 1980;59:608–613
  27. Weibull W. A statistical distribution function of wide applicability. J Appl Mech. 1951;18:293–297
  28. Trustrum K, Jayatilaka ADS. On estimating the Weibull modulus for a brittle material. J Mater Sci. 1979;14:1080–1084
  29. Davies DGS. The statistical approach to engineering design in ceramics. Proc Br Ceram Soc. 1973;22:429–452
  30. Stanley P, Fessler H, Sivill AD. An engineer's approach to the prediction of failure probability in brittle components. Proc Br Ceram Soc. 1973;22:453–487
  31. Ritter JE, Bandyopadhyay N, Jakus K. Statistical reproducibility of the dynamic and static fatigue experiments. Ceram Bull. 1981;60:798–806
  32. Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent. 1996;75:18–32
  33. Fok SL, Mitchell BC, Smart J, Marsden BJ. A numerical study on the application of the Weibull theory to brittle materials. Engng Fracture Mech. 2001;68:1171–1179
  34. Giovan MN, Sines G. Biaxial and uniaxial data for statistical comparison of a ceramic's strength. J Am Ceram Soc. 1979;62:510–515
  35. Ban S, Anusavice KJ. Influence of test method on failure stress of brittle materials. J Dent Res. 1990;69:1791–1799
  36. Ban S, Hasegawa J, Anusavice KJ. Effect of loading conditions on bi-axial flexure strength of dental cements. Dent Mater. 1992;8:100–104
  37. Piddock V, Marquis PM, Wilson HJ. The mechanical strength and microstructure of all-ceramic crowns. J Dent. 1987;15:153–158
  38. Ritter JE, Jakus K, Batakis A, Bandyopadhyay N. Appraisal of biaxial flexure strength testing. J Non-Cryst Solids. 1980;38&39:419–424
  39. Shetty DK, Rosenfield AR, McGuire P, Bansal GK, Duckworth WH. Biaxial flexure tests for ceramics. Am Ceram Soc Bull. 1980;59:1193–1197
  40. Kirstein AF, Woolley RM. Symmetrical bending of thin circular elastic plates of equally spaced point supports. J Res Natl Bureau Standards. 1967;71:1–10
  41. de With G, Wagemans HHM. Ball-on-ring test revisited. J Am Ceram Soc. 1989;72:1538–1541

PII: S0300-5712(02)00012-X

Journal of Dentistry
Volume 30, Issue 4 , Pages 153-160 , May 2002

Article Tools

* Image Usage & Resolution